Carrier Essential Clearance and Specifications for the 50GS Air Conditioner

Page 4

REQUIRED CLEARANCE TO COMBUSTIBLE MATL.

 

INCHES [mm]

TOP OF UNIT

14.00

[355.6]

DUCT SIDE OF UNIT

2.00

[50.8]

SIDE OPPOSITE DUCTS

14.00

[355.6]

BOTTOM OF UNIT

0.50

[12.7]

ELECTRIC HEAT PANEL

36.00

[914.4]

REQUIRED CLEARANCE FOR OPERATION AND SERVICING

 

INCHES [mm]

 

EVAP. COIL ACCESS SIDE

36.00

[914.0]

 

POWER ENTRY SIDE

36.00

[914.0]

 

(EXCEPT FOR NEC REQUIREMENTS)

 

 

 

UNIT TOP

48.00

[1219.2]

 

SIDE OPPOSITE DUCTS

36.00

[914.0]

 

DUCT PANEL

12.00

[304.8]

*

NEC. REQUIRED CLEARANCES.

 

INCHES

[mm]

BETWEEN UNITS, POWER ENTRY SIDE

42.00

[1066.8]

UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00

[914.0]

UNIT AND BLOCK OR CONCRETE WALLS AND OTHER

 

 

GROUNDED SURFACES, POWER ENTRY SIDE

42.00

[1066.8]

*MINIMUM DISTANCES: IF UNIT IS PLACED LESS THAN 304.8 [12.00] FROM WALL SYSTEM, THEN SYSTEM PERFORMANCE MAYBE COMPROMISE.

C99006

 

 

UNIT WEIGHT

UNIT HEIGHT

CENTER OF GRAVITY

UNIT

ELECTRICAL CHARACTERISTICS

IN. (MM)

 

IN. (MM)

 

 

 

 

 

 

 

lb.

kg

”A”

X

Y

Z

50GS048

208/230-1-60, 208/230-3-60, 460-3-60

324

145

38.98 (990.2)

20.0 (508.0)

17.0 (432.0)

17.0 (432.0)

50GS060

208/230-1-60, 208/230-3-60, 460-3-60

389

176

38.98 (990.2)

19.0 (482.6)

16.0 (406.0)

17.0 (432.0)

50GX042

208/230-1-60, 208/230-3-60, 460-3-60

321

146

38.98 (990.2)

20.5 (520.7)

16.75 (425.5)

16.6 (421.6)

50GX048

208/230-1-60, 208/230-3-60, 460-3-60

326

148

38.98 (990.2)

19.5 (495.3)

17.6 (447.6)

18.0 (457.2)

50GX060

208/230-1-60, 208/230-3-60, 460-3-60

399

181

42.98 (1091.1)

20.5 (520.7)

16.2 (412.8)

17.6 (447.0)

 

 

 

 

 

 

 

 

Fig. 3— 50GS048–060 and 50GX042–060 Unit Dimensions

2.Place each of the four (4) metal lifting brackets into the rigging holds in the composite pan.

3.Tighten the ratchet strap unit tight. Lifting brackets should be secure in the rigging holds.

4.Attach the clevis or hook of sufficient strength to hole in the lifting bracket (See Fig. 6).

5.Attach safety straps directly to the field supplied rigging straps or clevis clip. Do not attach the safety straps to the lifting brackets.

6.Use the top of the unit as a spreader bar to prevent the rigging straps from damaging the unit. If the wood top is not available, use a spreader bar of sufficient length to not damage the unit.

4

Image 4
Contents Table of Contents Safety ConsiderationsIntroduction 50GS018-042 and 50GX024-036 Unit Dimensions Installation Inspection50GS048-060 and 50GX042-060 Unit Dimensions Roof Curb Dimensions 50GS and 50GX Unit Corner Weights Suggested Rigging Physical Data-Unit 50GS Configuring Units for Downflow Vertical DIS- ChargePhysical Data-Unit 50GX Supply and Return Duct Opening Control Voltage Connections HIGH-VOLTAGE ConnectionsStandard Connection Electrical Data-50GS MocpElectrical Data-50GX MCA MocpTransformer Protection PRE-START-UPStart UP Cooling Section and Make ADJUST- Ments Checking and Adjusting Refrigerant ChargeSTART-UP Checking Cooling Control OperationWiring Diagram 208/230-60-1 Wiring Diagram 208/230-60-3 Wiring Diagram Indoor Airflow and Airflow Adjustments MaintenanceColor Coding for 208/230-V Motor Leads Color Coding for 460-V GE Motor Leads460 Volt Unit Watts 281 282 278 276 Cfm 833 776 702 638 554 Cooling Charging Chart, 50GS018 Units Cooling Charging Chart, 50GS042 Units Evaporator Blower and MotorCooling Charging Chart, 50GX030 Units Condenser FAN Condenser COIL, Evaporator COIL, and CONDEN- Sate Drain PANRefrigerant Circuit Troubleshooting START-UP ChecklistEvaporator Airflow Liquid Line StrainerTroubleshooting-Cooling Symptom Cause RemedySTART-UP Checklist Remove and Store in JOB File Book Catalog No Form 50GS,GX-4SI Replaces 50GS,GX-3SI Tab

50GX, 50GS specifications

Carrier has long been a leader in the HVAC industry, and its latest offerings, the 50GX and 50GS series, continue this tradition. These units stand out for their robust design, advanced technology, and energy-efficient operation, making them ideal choices for commercial and light industrial applications.

The Carrier 50GX is a packaged rooftop unit known for its innovative features aimed at enhancing energy efficiency while ensuring optimal indoor air quality. It employs a variable-speed compressor, which allows for precise temperature control and reduced energy consumption. The 50GX is equipped with microprocessor controls that optimize performance and simplify maintenance, offering real-time diagnostics and monitoring.

One of the standout technologies in the 50GX is its use of R-410A refrigerant, a greener alternative that reduces environmental impact without compromising cooling performance. This refrigerant is designed to deliver superior cooling efficiency while meeting strict environmental regulations. Additionally, the system features an integrated economizer, which takes advantage of outside air to improve energy efficiency during cooler months, reducing reliance on mechanical cooling.

The 50GS series, while similar in many respects to the 50GX, is tailored for applications requiring heating solutions. These units offer gas heat as an option, providing flexibility for varying climate conditions. The 50GS also incorporates an advanced heat exchanger design that maximizes heat transfer efficiency and reduces operational costs.

Both the 50GX and 50GS units are built with durability in mind. They feature a galvanized steel cabinet with a powder-coated finish, providing resistance to rust and corrosion. The robust construction ensures a long lifespan even in challenging environments.

Maintenance is made easier with these models, thanks to their accessible design that allows for quick servicing. Both the 50GX and 50GS units come with a host of customizable options, including different airflow configurations and additional filtration systems to enhance air quality.

In conclusion, the Carrier 50GX and 50GS series represent the pinnacle of HVAC technology with their focus on energy efficiency, environmental sustainability, and robust construction. These units are ideal for customers looking to invest in reliable and efficient climate control solutions for their facilities, combining advanced technology with time-tested engineering.