Introduction
Prepare to Assemble
This manual contains information for the proper assembly, operation and care of your SP300 backpack sprayer. Carefully read and follow the instructions contained in this manual before operating your sprayer.
Pump Cham- | Vent Dia- | |
phragm | ||
ber | ||
| ||
| Cap |
Packing Ring
Nut
Tank
Pump Lever
Wand |
Nozzle |
Unpack the following items shipped in your sprayer box:
Wand
Pump Lever
Tank Assembly and Connecting Rod
Small Parts Kit
From inside the sprayer tank, remove the plastic bag from the tank strainer.
Connecting |
| |
Rod | Tank | |
Wand | ||
|
| Trigger | |
| Valve | |
| Manual | |
Pump | Small Parts | |
Kit | ||
Lever | ||
| ||
Hitch Pins and Washers | ||
Small Parts included in the plastic bag
Trigger Valve |
Install the Pump Lever
| THE SERIAL NUMBER IS LOCATED |
| ON THE BOTTOM OF THE TANK. |
Specifications |
|
Net Weight | 8.4 pounds (3.8 kg) |
Tank Capacity | 3.0 U.S. gallons (11.4 liters) |
Tank Material | Polyethylene |
Fill Opening Diameter | 4.5 inches (114 mm) |
Pump Type/Material | Piston/Plastic |
Operating Pressure | |
Wand Assembly Length | 27.5 inches (699 mm) |
Hose Length | 69.75 inches (1771 mm) |
Nozzle Installed | Red Adjustable Cone |
Specifications subject to change without notice.
Connecting Rod
Pump Lever
Washer
|
| Pump Lever |
Hitch Pin | Washer | Shaft |
|
1.Remove the hitch pin from the pump lever shaft.
2.Install a flat washer on the connecting rod.
3.Lightly grease the holes in the pump lever and assemble on to the pump lever shaft and connecting rod. Secure with flat washers and hitch pins.