Assembling the Spray Wand
Wand | Screw Cap | Trigger |
|
| Valve |
Push the wand into the trigger valve and secure with screw cap. Hand tighten to prevent leakage.
CAUTION!
Do not overtighten!
Adjusting the Shoulder Straps
Tightening
1.Place the sprayer on your back with the straps loosened.
2.Hold the adjustment ring firmly and pull until backpack is secure in place.
Buckle
Adjustment 
Ring
Loosening
Lift up on the buckle to release tension.
IMPORTANT!
After assembling the sprayer, fill the tank with clear water and lay it on its side. Check for leaks. Return sprayer to its upright position. Pump the lever
Most leaks can be stopped by tightening the appropriate con- nection or fitting. Any leaks must be stopped prior to filling the sprayer with chemicals.