Audio Adjustment
Volume Adjustment
•On unit, turn VOLUME DOWN/UP knob clockwise to increase the sound level, or counterclockwise to decrease it.
•On remote, use VOLUME CONTROL ( ) to increase
the sound level, or use the VOLUME CONTROL () to decrease sound.
Sound Quality Adjustment
•To activate stereo sound
-You can choose between 8 fixed sound impressions and 1 USER MODE.
Select a desired sound mode using the EQ PATT. button ( or turning EQ knob on the front panel).
-When you select USER MODE, press the ENTER button repeatedly.
You can select three sound modes (BASS, MIDDLE, TREBLE).
-Each time you press the button the indicator in the display window changes as follows.
FLAT → ROCK → POP → VOCAL → CLASSIC ↑
USER MODE ← SAMBA ← SALSA ← JAZZ
• Headphone Jack
Connect a stereo headphone plug (6.3mm) into the headphone jack.
The speakers are automatically disconnected when you plug in the headphones (not supplied).
DISPLAY MODE
Whenever you press DISPLAY MODE, you can enjoy the spectrum change with 6 types in the display.
XDSS (Extreme Dynamic Sound System)
-Use the XDSS feature to reinforce treble, bass and surround effect.
-Each time you press XDSS the indicator changes as follows.
XDSS OFF →XDSS1 ON → XDSS2 ON
DEMO
Press DEMO with the power off to review the available functions in the display window.
To cancel DEMO, press POWER or DEMO again. During demonstration with the power on, you can cancel DEMO by pressing any other button.
DIMMER
Dimmer darkens the display window by half with the power on. Press DIMMER once, and the display dark- ens. If you press Dimmer a second time, the display will darken by half again. To cancel, press Dimmer a third time.
BEFORE OPERATION
MUTE
Press MUTE to turn off the sound, press again to restore.
You can mute your unit in order, for example, to answer a telephone, “MUTE” indicator flashes in the display window.
SURROUND
To activate surround mode
•You can choose between 6 fixed sound impressions.
•Select a desired surround mode using the SURROUND button.
•Each time you press SURROUND, the indicator changes as follows.
SURROUND OFF →SIMULATED LOW →SIMULATED HIGH
↑
MOVIE HIGH ← MOVIE LOW ← MUSIC HIGH ←MUSIC LOW
Auxiliary (External Equipment) Input
1
2
Connect an auxiliary device i.e. TV or VCR, via the rear mounted AUX input jacks.
Press AUX. | ote | |
You can also record from the auxiliary input source, | ||
| ||
| see Recording Section. |
11