Zenith LMG340 warranty Timer Functions, To cancel or check the timer

Timer Functions

Using the TIMER function you can have the radio reception and recording, CD play, tape play or auxiliary source play and recording turned on and off at the time desired.

1 Press CLOCK to check the current time.

2 Press “TIMER” to enter the timer setting mode. (If you want to correct the previous memorized TIMER setting, press and hold the “TIMER” button more than 2 seconds.)

The previous memorized timer setting for On

Time and “TIMER” appear in the display. Each function: TUNER-CD-TAPE flash in the display

window in turn.

	Press SET when the desired function
3 flashes.
4	If you select TUNER:
	PLAY and REC flash in the display window

alternately for about 3 seconds. Press SET to confirm the desired operating mode.

REC: TUNER recording and play

PLAY: TUNER play only

• If you have selected CD or TAPE, ignore step 4.

5 If you have selected TUNER:

To correct a previously memorized preset number, use the MULTI JOG SHUTTLE and press SET.

The hour “ON TIME” display flashes.

•If you have selected CD or TAPE, ignore step 5.

6 Set the turn on hour using the MULTI JOG SHUTTLE.

7 Press SET to confirm the turn on hour time. The minute display flashes.

8 Set the turn on minutes time using the

MULTI JOG SHUTTLE.

9 Press SET to confirm the turn on minutes time.

The hour ‘OFF TIME’ now flashes in the display.

10	Set the turn off hour time using the MULTI
	JOG SHUTTLE.
11	Press SET.
12	Set the turn off minutes using the MULTI
	JOG SHUTTLE.
13	Press SET.
14	Adjust the volume level using the MULTI
	JOG SHUTTLE.
15	Press SET.
	“TIMER” appears in the display window and
	the timer setting has been completed.
16	Turn the system off.
	The selected function is automatically

switched on and off at the preset times.

To cancel or check the timer

Each time the “TIMER” button is pressed, you can select the timer set or cancel. You can also check the timer setting status.

To activate or check the timer, press the “TIMER” button repeatedly so that “TIMER” appears in the display window.

To cancel the TIMER, press the “TIMER” button repeatedly so that “TIMER” disappears from the display window.

10