The machine is equipped in the base with an electronic device “IMO V3” and a control panel showing the following features:
1- Main Switch: connects or disconnects all of the machine systems. When the switch is pushed towards the symbol “I”, the led will light showing that the machine is “ON”.
2- Marcha: red led shows that the machine is connected and in
3- Status: green led will light every time we press the pedal indicating that the machine is in operation. If illuminated in a pulsating fashion, it indicates failure, disconnect the machine immediately.
4- Green pointer or switch: turns the lighted pointer on or off. Only in those machines equipped with this device (optional).
5- Red switch or feeder: connects or disconnects the two 24V motors that make the grommets and washers rotate in the deposits.
6- Washer detector: detects the flow of washers in the railing. When selected with the position “0”, it does not detect the washers in the railing, and the machine may place only grommets or punch holes. When pulsated to the outermost position “1”, it detects the washers, and will not allow to place the grommet without a washer or to punch holes. The railing must have at least 8 washers for this feature to work properly.
The position" 2" and" 3" doesn't have application in this model of machine, we therefore will always indicate" 0" or "1”.
7- 6 Amp fuse. Fuse holder. Uses a 6 amp fuse to protect the machine from high voltage.
4
6
2
3
5
7
1
The IMO V3 device is responsible for the electrical working of the machine.
It must not be opened or manipulated except by an authorized technician, or with the consent of Sinclair Equipment.