Sinclair PG-239 manual Other Machine Uses

Page 8

OTHER MACHINE USES

For setting grommets without the washers, or punching out holes, all the washers must be removed from the hopper box and the guides, the grommet raceway must be moved back and the top and bottom dies (parts nº 217, 218, 219 and 229) must be replaced by other parts specific to this task.

THIS MACHINE MUST NOT BE USED FOR ANY FUNCTION OTHER THAN THAT FOR WHICH IT WAS ORIGINALLY DESIGNED AND WHICH IS SPECIFIED IN THIS INSTRUCTION MANUAL: THE AUTOMATIC SETTING OF GROMMETS WITHOUT WASHERS, GROMMETS ONLY, OR HOLE PUNCHING ONLY.

Image 8

Contents Model PG-239 Introduction Machine Identification and PlatesDescription of the Machine and ITS Operation Unloading and Levelling InstallationMachine Handling Learning Instructions Before Starting the MACHINE, Read These Warnings CarefullySetting UP the Machine for ITS Operation Machine DescriptionPage Other Machine Uses Adjustments Adjusting the Tightness of SETTING, Changing Dies Setting Grommets ONLY, Without the WashersPlacement Laser Light Optional Accessories Perforating onlyPage Maintenance Mechanical Part of the MachineTroubleshooting Page Page Security Schematic Description Schematic Description Without Washer Compensator Schematic # Description Washers Raceway See parts list on following Schematic Description Grommets Raceway Grommets Raceway Page