Carrier Model Nomenclature: Insight into the Packaged Air Conditioner Systems

Page 1

50XP

Performancet 13 SEER

Single---Packaged Air Conditioner System with PuronR (R---410A) Refrigerant Single and Three Phase

2 to 5 Nominal Tons (Sizes 024---060)

Product Data

C99064

Fig. 1 - Unit 50XP

Single-Packaged Products with Energy-Saving Features and PuronR refrigerant.

SUp to 13.5 SEER

SFactory-Installed TXV

SVariable Speed Blower-Standard

SLow Sound Levels

FEATURES/BENEFITS

One-piece cooling unit with optional electric heater, low installation cost, dependable performance and easy maintenance.

Efficient operation

High-efficiency design with a SEER (Seasonal Energy Efficiency Ratio) of up to 13.5.

Puron Environmentally Sound Refrigerant is Carrier’s unique refrigerant designed to help protect the environment. Puron is an HFC refrigerant which does not contain chlorine that can harm the ozone layer. Puron refrigerant is in service in millions of systems proving highly reliable, environmentally sound performance.

IdealHumidity Technology featuring Thermidistat control and Variable Speed Blower motor that provides greater comfort, humidity control, and energy efficiency. You can expect up to 30 times better dehumidification; economical constant fan for less than $50 a year, which provides improved indoor air quality and more even temperatures from room to room; and reduced indoor noise due to lower air velocity. In addition, you’ll realize improved installation flexibility with 3 different airflow choices for best overall comfort.

Easy Installation

Factory-assembled package is a fully self-contained, electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard cooling sizes with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.

Durable, dependable components

Scroll Compressors are designed for high efficiency. Each compressor is hermetically sealed against contamination to help promote longer life and dependable operation. Each compressor also has vibration isolation to provide quieter operation. All compressors have internal high pressure and overcurrent protection.

Convertible duct configuration

Unit is designed for easy use in either downflow or horizontal applications. Each unit is easily converted from horizontal to downflow. Downflow operation is easily provided in the field to allow vertical ductwork connections. The basepan utilizes knockout style seals on the bottom openings to ensure a positive seal in the horizontal airflow mode.

Direct-drive variable speed blower motor is standard on all models.

Direct-drive PSC condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 55_F (13_C) outdoor temperature. Motormasterr II low ambient kit is available as a field-installed accessory.

Thermostat controls

Time Guardr II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.

Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections make checking operating pressures easier.

Thermostatic Expansion Valve - A hard shutoff, balance port TXV maintains a constant superheat at the evaporator exit (cooling cycle) resulting in higher overall system efficiency.

Evaporator and condenser coils are computer-designed for optimum heat transfer and cooling efficiency. The evaporator coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection again damage. The condenser coil is internally mounted on the top tier of the unit. Copper fin coils and pre-coated fin coils are available from the factory by special order. these coils are recommended in applications where aluminum fins are likely to be damaged due to corrosion. They are ideal for seacoast applications.

High and Low Pressure Switches provide added reliability for the compressor.

1

Image 1
Contents Convertible duct configuration FEATURES/BENEFITSEfficient operation Durable, dependable componentsTable of Contents Model Number Nomenclature ARI* Capacities Weighted Sound Power dBACooling Capacities and Efficiencies Physical Data-Unit 50XP Physical DataFactory-installed options Options and AccessoriesField-installed accessories Electric HeatersEconomizer Unit Dimensions 50XP024-036 Unit Dimensions 50XP042-060 Ordering Number Accessory Roof Curb 50XP024-060Select unit that corresponds to power source available Selection Procedure with Example50XP Unit Suggested Rigging Select unit based on required cooling capacity50XP024 Performance Data50XP042 Performance Data Cont 50XP03650XP048 Cooling Notes Multiplication Factors Economizer 1-in. Filter Pressure Drop IN. W.CFilter Pressure Drop Table IN. W.C Electric Heat Pressure Drop Tables IN. W.C Small CabinetTypical Piping and Wiring Application Data FLA MCA Electrical DataMocp MIN MAX RLA LRA FLATypical Wiring Schematic 208/230-1-60 Typical Wiring Schematic 208/230-3-60 Operating sequence ControlsGuide Specifications Catalog No 50XP---05PD Special Features

50XP specifications

The Carrier 50XP is a high-efficiency air conditioning unit designed for residential and light commercial applications. It is known for its reliability, advanced features, and energy efficiency, making it a popular choice among homeowners and contractors alike. This unit integrates state-of-the-art technology to provide optimal indoor comfort regardless of external weather conditions.

One of the main features of the Carrier 50XP is its efficient cooling and heating capability. The unit utilizes a scroll compressor, which is renowned for its durability and ability to deliver consistent performance. This type of compressor operates quietly and efficiently, contributing to lower energy costs while providing substantial cooling output.

The 50XP model is equipped with a multi-speed blower motor, which allows for precise control over airflow delivery. This feature ensures that air is distributed evenly throughout the space, enhancing comfort levels. Additionally, the unit supports variable speed operation, which further optimizes energy consumption while maintaining desired indoor temperatures.

Another significant characteristic of the Carrier 50XP is its advanced refrigerant technology. The unit is designed to use environmentally friendly refrigerants, aligning with modern standards for sustainability and reduced environmental impact. This eco-conscious approach not only complies with regulatory guidelines but also promotes higher energy efficiency across its operational lifespan.

The 50XP also features advanced communication capabilities, allowing it to integrate seamlessly with Carrier's smart home technology. This connectivity empowers users to remotely control their HVAC system, monitor energy usage, and receive maintenance alerts. Such smart technology enhances convenience and efficiency, enabling users to manage their indoor climate more effectively.

Noise reduction is a critical consideration in residential and light commercial units, and the Carrier 50XP excels in this aspect. With an insulated chassis and specially designed fan blade, the unit minimizes operational noise, ensuring a quiet environment during its operation.

In conclusion, the Carrier 50XP is a powerful and efficient air conditioning unit that showcases the latest advancements in HVAC technology. Its reliable performance, energy efficiency, and innovative features make it an ideal option for those looking to improve their indoor comfort while keeping energy costs low. With sustainable refrigerant options and smart home integration, the 50XP represents Carrier's commitment to quality, efficiency, and environmental responsibility.