Emerson DA-100 operation manual － 3 －, Misues

	HAZARD	CAUSE	SAFEGUARDS
General Safety		Improper operation or	Operators should be given adequate training in the
		maintenance may create a	safe use and maintenance of the equipment (in
		hazard.	accordance with the requirements of NFPA-33,
			Chapter 15 in U.S.). Users must comply with all
			local and national codes of practice and insurance
			company requirements governing
			ventilation, fire precautions, operation, maintenance
			and housekeeping (in the U.S., these are OSHA
			Sections 1910.94 and 1910.107 and NFPA-33).
Noise Levels		The continuous A-weighted	Wear earplugs when using the spray gun.
		sound pressure level of this
		spray gun may exceed
		85dB(A) depending on the air
		cap/nozzle set-up being
		used. Sound levels are
		measured using an impulse
		sound level meter and
		analyzer, when the gun is
		being used in a normal
		spraying application. Details
		of actual noise levels
		produced by the various air
		cap/nozzle set-ups are
		available on request.
Spraying solvent		Pressured air/fluid passage	Always wear eye protection when spraying or
		may be broken when	cleaning the equipment.
		cleaning or flashing with
		solvent.
		The solvent may be harmful
		if contacted with eyes.

MISUES:

・All spray guns project particles at high velocity and must never be aimed t any part of body. ・Never exceed the recommended safe working pressure for any of the equipment used.

・The fitting of non-recommended or non-original accessories or spare parts may create hazardous conditions.

・Before dismantling the equipment for cleaning or maintenance, all pressures, air and material, must be isolated and released.

Disposal of non-metallic materials must be carried out in an approved manner. Burning may generate

toxic fumes. The removal of waste solvents and coating materials should be carried out by an authorised local waste disposal service.

－ 3 －