Harbor Freight Tools 94573 Specifications, Unpacking, Charging Instructions, See Figure E

Page 6

SPECIFICATIONS

Charger Input

120 V~ / 60 Hz

Charger Output

12 VDC

Battery Type

Rechargeable 12V / 10 Ah

Charge Time

8 Hours

Charger Cord/Plug

58-1/2” L, 2-Prong

Spray Time Output

Approximately 9 to 10 Hours

 

(Full Charge)

Tank Capacity

4.8 Gallons

Flow Rating

0.7 Gallons Per Minute

Maximum

65 PSI

Pressure

 

Unit Dimensions

7” Long x 15” Wide x 23-5/8” High

Spray Rod

28” Long x 3/8” Diameter

Dimensions

 

Unit Weight

17.5 lb.

(Empty)

 

Accessories

Conical Mist Nozzle

 

Four Hole Adjustable Nozzle

 

Mist Nozzle / 30° Dual Nozzle

Additional

Diaphragm Pump

Features

Triple Screen Water Filtration

UNPACKING

When unpacking, make sure all that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

Charging Instructions

1.The Battery (51) for the Sprayer must be fully charged before using the tool. When charging for the first time, and all subsequent charges, the charge time is 8 hours. Never charge the Battery (51) for longer than 8 hours, as damage to the Battery and/or Sprayer will occur.

FIGURE E

CHARGER

(63)

CHARGING

PLUG POWER SWITCH

(58)

CHARGE FOR 8 HOURS

(DO NOT OVERCHARGE)

2.To charge the Battery (51), Turn the Power Switch (58) to its “OFF” position.

(See Figure E.)

3.Insert the chrome Charging Plug of the Charger (63) into the Charging Receptacle of the Sprayer. Make sure to screw the chrome Charging Plug onto the Receptacle firmly. (See Figure E.)

4.Plug the Power Cord Plug of the Charger

(63)into the nearest, 120 volt, grounded, electrical outlet. (See Figure E.)

5.Charge the Battery (51) for 8 hours. IMPORTANT: The Charger (63) will not automatically shut off when the Battery

(51)is fully charged. Avoid Battery/

tool damage by removing power to the Charger at the end of 8 hours charge time. (See Figure E.)

6.Keep children and pets away from the Battery while it is charging. Regularly check the Battery to make sure it is charging properly.

7.When finished charging, disconnect the

Charger (63) from the electrical outlet. Then, unscrew and remove the chrome Charging Plug of the Charger (63) from the Charging Receptacle of the Sprayer.

(See Figure E.)

8.On a full charge, the Sprayer will operate approximately 9 to 10 hours.

 

 

REV 06j

Page 6

For technical questions, please call 1-800-444-3353.

SKU 94573

Image 6
Contents For technical questions or replacement parts, please call Backpack SprayerSave This Manual General Safety RulesPersonal Safety Work AreaTool USE and Care Specific Safety RulesService Industrial applications must follow Osha requirementsGrounding Extension Cords Symbology Double Insulated Tools Tools with Two Prong PlugsOutlets for 2-Prong Plug Charging Instructions SpecificationsUnpacking See Figure ESee Figure H Assembly and Operating InstructionsNozzle Selection And Assembly See Figure GTo Fill The Tank To Operate The SprayerSee Figures E and L Please Read the Following Carefully INSPECTION, Maintenance CleaningProblem Possible Solution Do not use damaged equipmentParts List Part Description QtyAssembly Diagram