Compressor
Reassembly
1.Carefully position compressor back into sprayer body. Make sure piston head facing front of sprayer.
ti8950a | ti8940a |
2. Replace and tighten grounding screw (49).
49
ti8941a
3. Reattach air lines to compressor.
ti8873a
4.Reattach 2 wires to compressor see Wiring Diagram, page 27.
5.Replace air cylinder and tighten shoulder bolt (49) to lock into place.
49
ti8879a
6.Replace bracket (21) and tighten 4 screws (29).
29
21
ti8877a
7.Replace grounding screw (49) and tighten onto bracket (21).
8.Replace pivot bolt (26) and nut. Use 9/16 in. socket and wrench to tighten into place. Tighten screw until spring washers are flattened.
26
ti8878a
9.Replace and tighten second grounding screw (49) to bracket (21).
21
49
ti9013a
10.Replace RotoFlex™ II Pump hose; page 9 or 10.
11.Replace Shroud, page 7.
311772G | 13 |