RotoFlex™ II Pump (RTX 900)
RotoFlex™ II Pump (RTX 900)
Disassemble
1.Relieve Pressure, page 6.
2.Unplug sprayer from outlet.
ti2810b
3.Remove Shroud, page 7.
4.Loosen and remove screw (28) on hose bracket.
28
ti9009a
5. Remove hose bracket (25).
25
ti8881a
6.Slide pump fittings over and push through keyhole slots.
ti8869a
7.Grab pump hose (16) from side of unit and remove pump hose by hand.
16
ti8949a
Reassemble
1.Bend hose (16) so colored dots on hose fittings face each other.
ti9331a
2.Slide new pump hose (16) over rollers. Move pump rollers by hand until or flip power switch to rotate rollers until they are positioned correctly with pump hose.
ti8868a
3.Feed pump fittings through front access panel keyhole slots and slide into place.
4.Replace hose bracket (25) to lock pump hose fit- tings into place.
5.Replace hose bracket (25) and tighten screw (28).
6.Replace Shroud, page 7.
7.Break in new pump by adding 1 cup of water to pump and running dry for 3 minutes.
311772G | 9 |