Hitachi AA 2000 dimensions Solid Stream Spray Tips

Spray Tip and Air Cap Selection Charts

SOLID STREAM SPRAY TIPS

For use in applications requiring a solid stream of fluid such as with mastics or sealers. All these tips require Air Cap 218±336.

Orifice Size
inches (mm)	Part No.	Pattern
0.027 (0.689)	182±027	Solid stream,
0.029 (0.737)	182±029	approximately
		0.25" (6.35 mm)
0.031 (0.787)	182±031
0.033 (0.838)	182±033
0.035 (0.889)	182±035
0.037 (0.940)	182±037
0.039 (0.991)	182±039
0.041 (1.041)	182±041
0.043 (1.092)	182±043
0.045 (1.143)	182±045
0.047 (1.194)	182±047

FINE FINISH SPRAY TIPS

For use in application of certain urethanes, clearcoats, and light-weight air-dry enamels. All these tips require replace- ment of standard diffuser-seat with Diffuser-seat part no. 223±139.

	Light Viscosity		Fan Width at	Fine Finish
Orifice Size	fl oz/min*		12º (300 mm)	Spray Tip
inches (mm)	(liters/min)		inches (mm)	Part No.
0.012 (0.305)	10.0	(0.3)	6±8	182±312
			(152±203)
0.014 (0.356)	13.6	(0.4	6±8	182±314
			(152±203)
0.012 (0.305)	10.0	(0.3)	10±12	182±512
			(250±300)
0.014 (0.356)	13.6	(0.4	10±12	182±514
			(250±300)
0.016 (0.406)	17.0	(0.5)	10±12	182±516
			(250±300)
0.018 (0.457)	20.9	(0.6)	10±12	182±518
			(250±300)
0.020 (0.508)	25.8	(0.8)	10±12	182±520
			(250±300)

*Fluid output at 600 psi (41 bar).

AIR CAPS

	Tip Size
	Used With	Air
Application	inches (mm)	Consumption	Part No.
	smaller than		217±303{
Standard	0.025 (0.635)	3±5 scfm
	0.027 (0.689)		218±336
Standard	and larger	3±5 scfm
	smaller than		219±093{{
Fine Finish	0.025 (0.635)	5±7 scfm
	smaller than		219±094
High Solids	0.025 (0.635)	5±7 scfm
Fine Finish
with Pattern	smaller than		222±507
Adjustment	0.025 (0.635)	5±7 scfm
High	smaller than		222±607
Atomization	0.025 (0.635)	5±7 scfm
High Effi-
ciency Low	smaller than		222±608
Pressuret	0.025 (0.635)	5±7 scfm

{Air cap provided with spray gun.

{{The pattern adjustment valve must be open (turned fully clockwise) when using this air cap.

307-586 19