Accessories
Use Only Genuine Graco Parts and Accessories
Four Finger Trigger 183±104
Longer than standard trigger. Reduces trigger pull when spraying mastics and heavy fluids. Replaces item 3, in the parts list, page 17.
Plastic Ball Tipped Fluid Needle 220±413
For fluid pressures below 500 psi (35 bar) and light viscosity fluid. Replaces item 5, in the parts list, page 17.
Ruby Ball Tipped Fluid Needle 222±497
For use with acid catalyzed finishes. Replaces item 5, in the parts list, page 17.
Fluid Needle Compression Spring 106±452
For spraying higher solids or heavier viscosity fluids. Replaces item 24, in the parts list, page 17.
Ultra High Molecular Weight Polyethylene Needle Packing Kit 221±150
Use to replace needle packings (item 47, in the parts list, page 17) when spraying urethane fluids. Helps eliminate isocyanate crystallization in packing area.
Grounding Clamp and Wire 222±011
12 ga, 25 ft (7.6 m) wire
Brush 101±892
For cleaning the gun.
High Pressure Ball Valves, Vitonr Seals 5000 psi (350 bar) Maximum Working Pressure Can be used as fluid drain valve.
210±657 1/2 npt(m) 210±658 3/8 npt(m) 210±659 3/8 x 1/4 npt(m)
In-line Fluid Filter 210±500
5000 psi (350 bar) Maximum Working Pressure
100 mesh. Fits onto the gun's fluid connector. 1/4±18 npsm.
210±501 | 168±517 |
| |
| Filter |
205±264
164±075
Bleed-type Master Air Valve
300 psi (21 bar) Maximum Working Pressure Relieves air trapped in the air line between the pump air inlet and this valve when closed.
107±141 3/4 npt(m x f) inlet & outlet 107±142 1/2 npt(m x f) inlet & outlet