Graco TI3840a Slip-Fit Polycarballoy Mix Module Kits, Standard Round Pattern Guns

Parts

Slip-Fit Polycarballoy Mix Module Kits

Slip-Fit Polycarballoy Mix Module Part Numbering Code

Example	First Two Digits	Second Two Digits	Last Two Digits
Part No.
MR3535	MR=Mechanical purge standard, round pattern	35=Component A	35=Component B
		impingement port	impingement port
MF3535	MF=Mechanical purge standard, flat pattern
		size (.035 in.).***	size (.035 in.).***
XR3535	XR=Mechanical purge direct impingement, round pattern
XF3535	XF=Mechanical purge direct impingement, flat pattern

*** Some modules have multiple impingement ports (see below). Size is given as the equivalence of a single port.

Standard Round Pattern Guns

Slip-Fit Polycarballoy	No. of Impingement Ports		Impingement
Mix Module Kit			Port Drill Bit
	A	B
(includes drill bits)			Size, nominal**
MR3535	2	2	#73
MR4747	2	2	#67
MR5757	3	3	#67
MR6666	4	4	#67
MR8282	4	4	#60
MR9494	4	4	#56
Standard Flat Pattern Guns
Slip-Fit Polycarballoy	No. of Impingement Ports		Impingement	Counterbore
Mix Module Kit			Port Drill Bit	Drill Bit Size,
	A	B
(includes drill bits)			Size, nominal**	nominal**
MF1818	1	1	#77	#67
MF2929	1	1	#69	N/A
MF3535	2	2	#73	N/A
MF4747	2	2	#67	N/A
MF5757	3	3	#67	N/A

**For further information, see identification chart under Drill Bit Kits, page 51.

48 309856U