Graco 288046, Series B Apply Fluid, Incorrect, No air Too little air Correct amount Air

Page 13

For a narrower pattern, supply air to the gun fan air inlet (or open the fan adjustment valve on manifold 288223). The tip size is the primary controller of the pattern size. Use the fan air only as needed to slightly adjust the pat- tern size.

Operation

To achieve best results when applying fluid:

•Keep gun perpendicular and 8 to 10 inches (200 to 250mm) from object being sprayed.

•Use smooth, parallel strokes across surface to be sprayed with 50% overlap. See FIG. 12.

Incorrect

 

 

TI0792

no air

too little air

correct amount

 

 

of air

FIG. 11: Correct Spray Pattern

 

 

 

 

Apply Fluid

The spray gun has a built-in lead and lag operation.

TI8098a

 

When triggered, the gun begins emitting air before the

 

fluid is discharged. When the trigger actuation air is

Correct

stopped, the fluid stops before the air flow stops. This

helps assure the spray is atomized and prevents fluid

 

buildup on the air cap and tip.

 

Adjust the system control device, if it is automatic, so the

 

gun starts spraying just before meeting the work piece

 

and stops as soon as the work piece has passed. Keep

 

the gun a consistent distance, 8 to 10 inches (200 to 250

 

mm), from the surface of the object being sprayed.

 

TI8099a

FIG. 12: Correct Spray Method

311052H

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Automatic G40 Air-Assisted Spray Guns Contents G40 Standard Spray Gun, 288046, Series B ModelsG40 Standard Spray Gun, 24F835, Series B G40 Plastic Seat Spray Gun, 288044, Series BEquipment Misuse Hazard Pressurized Equipment Hazard Ventilate Spray Booth InstallationConfigure Gun and Manifold Circulating SystemGround System Install Air FittingsReciprocating Arm Rod Mount Mount GunStationary Support Retrofit Adapter PlateConnect Air Line Side Mounted Manifold Ports Connect Fluid LineSetup Adjust Spray Pattern Pressure Relief ProcedureOperation Incorrect Apply FluidCorrect No air Too little air Correct amount AirDaily Gun Care MaintenanceFlushing and Cleaning General System MaintenanceTurn off the solvent supply General Troubleshooting TroubleshootingProblem Cause Solution Problem Cause Solution Spray Pattern Troubleshooting Disassembly ServiceItems Needed for Service TI8173b Cutaway View Part No Gun Shown Reassembly Diffuser Seat ReplacementParts AA RAC Assembly included with Model 288053 onlyPart Ref. No. No Description Qty PartsNorth America and International Manifold Description QtyManifold with Bottom Fluid Ports Part No. Description QtyPart No C343 Side Fluid Ports and Fan Adjustment ValveRING, Ptfe 311052H AAP Series Precision Spray Tips AAP Series Tip and Air Cap Selection ChartsTypical Air Application Tip Used With Consumption For use with G40 RAC Housing LTX Series RAC Tip Selection ChartsLTX Reverse-A-Clean RAC Spray Tips FFT Fine Finish RAC Spray Tips RAC Switch TipsWRX Wide RAC Spray Tips Accessories Grounding Clamp and Wire In-line Fluid Filter Ultimate Gun Cleaning Kit 15C161Air Cap Seal Kit Plastic Seat Repair KitDimensions Mounting Hole Layout Gun with Rear Port Manifold Rear Port ManifoldTriggering Speed Technical DataSound Data dBa Models 3/16 in. ball Cylinder Air Pressure Fluid PressureGraco Information Graco Standard Warranty
Related manuals
Manual 12 pages 23.99 Kb Manual 20 pages 21.73 Kb Manual 14 pages 60.52 Kb Manual 16 pages 50.96 Kb

288046, Series B specifications

Graco Series B, 288046 is a top-tier product designed to meet the rigorous demands of various applications in industries such as manufacturing, automotive, and construction. Renowned for its reliability and efficiency, this product stands out due to its innovative features and robust technology.

One of the standout features of the Graco Series B, 288046 is its advanced air-powered design. This design allows for smooth and consistent fluid transfer, minimizing downtime and enhancing productivity. The air-driven operation not only offers greater control over the flow rates but also ensures that the system can operate in situations where electric power may be unavailable or impractical. This versatility makes it ideal for various work environments.

The Series B is equipped with a high-performance motor that delivers exceptional power output while maintaining energy efficiency. This feature is particularly advantageous for businesses looking to reduce operational costs without compromising on performance. The motor is engineered to handle different fluid viscosities, making the Series B versatile for use with a wide range of materials, including paints, adhesives, and sealants.

Durability and ease of maintenance are key characteristics of the Graco Series B, 288046. Constructed from high-quality materials, the product is built to withstand harsh conditions, ensuring a long-lasting lifespan. Additionally, its modular design simplifies maintenance and repairs, allowing for quick replacements of components and minimal disruption to operations.

Safety is another paramount consideration incorporated into the Series B design. It features comprehensive safety mechanisms that protect users and equipment alike, reducing the risk of accidents during operation. This is especially crucial in environments where workers are regularly handling hazardous materials.

Graco also emphasizes user-friendly functionality. The Series B showcases intuitive controls, enabling operators to quickly familiarize themselves with the system and operate it efficiently. The product also includes adjustable pressure settings, allowing for precise application suited to specific tasks.

In conclusion, the Graco Series B, 288046 is an exemplary solution for companies seeking a reliable, efficient, and safe fluid handling system. With its advanced technologies, user-friendly features, and robust construction, it offers unmatched performance across various industries, ensuring optimal productivity and safety.
Top Page Image Contents