Pressure Control
Pressure Control
On/Off Switch
Removal
WARNING
Read Injection Hazard, page 3; Burn Hazard, page 4
1.Relieve pressure, page 5.
2.FIG. 13. Remove two screws (91) and swing down cover (77).
3.Disconnect ON/OFF switch connector (B) from PC board.
4.Press in on two retaining tabs on each side of ON/OFF switch (71) and remove switch from cover.
Installation
1.Install new ON/OFF switch (71) so tabs of switch snap into place on inside of cover.
2.Connect ON/OFF switch connector (B) to PC board.
3.Swing up cover (77) and secure with two screws (91).
7R(QJLQH
D
E
&/87&+ $ | % |
|
| ||
| ' |
|
&/87&+ % |
| ( |
| ||
|
|
|
| D |
| ||
|
WLD
FIG. 13
12 | 310813 Rev C |