Graco 310829F manual Clearing Tip Clogs

Page 15

Startup

ti10166a

ti10166a

heavy	ti5823a
heavy
edges

ti5824a	ti5825a
	ti5826a

		ti10167a	ti10167a

		Clearing Tip Clogs

1. Trigger gun and spray	2. Hold gun perpendicular,	1. Release trigger, put trig-	2. Put trigger safety ON,
test pattern. Slowly	10-12 in. (25-30 cm)	ger safety ON. Rotate	return SwitchTip to origi-
adjust pressure to elimi-	from surface. Spray back	SwitchTip. Take trigger	nal position, take trigger
nate heavy edges. Use	and forth. Use strokes	safety OFF and trigger	safety OFF and continue
smaller tip size if pres-	overlapped by 50%.	gun to clear the clog.	spraying.
sure adjustment can not	Start gun movement
eliminate heavy edges.	before triggering gun
	and release trigger
	before stopping gun
	movement.

310892F

15

Image 15

Contents Read warnings and instructions 310893 311046311861 310894Manual Conventions Fire and Explosion Hazard Equipment Misuse Hazard Component Identification Setup Approximate Fill Level Cold Change Engine to Motor Convertible ModelsChange Motor to Engine Startup Start engine Choke to open Setting Flush One seal SwitchTip and Guard AssemblyClearing Tip Clogs Main Menu Premium OperationDigital Tracking System DTS Pressure/Volume WatchDog Protection SystemChange Display Units To Activate Do Startup Sprayer model momen- tarily displays, e.g., G5900 = Gmax ll Short press DTS button and date code displays Now short press Do or longPress do step Ti6219a Ti5822a Pressure Relief Procedure CleanupFlush 20 SEC Increase sprayer life Hand tighten gun Onto gun Handle Warranty / Garantie / Garantía / Garanzia / Garantia Graco Headquarters Minneapolis