Graco 310829F manual Now short press, Do or long, Press do step

Page 21

Startup

SMARTCONTROL

 

SMARTCONTROL

 

SMARTCONTROL

SMARTCONTROL

ti5819a

ti6221a

 

ti5820a

ti6218a

 

Secondary Menu - Stored Data and WatchDog Pump Protection Modes

8.Press and hold DTS but- 9. Short press DTS button

ton until CLEAR ERROR

again to move to Watch-

NO ERROR CODE

Dog mode. You may

scrolls through the dis-

now short press and

play and then error code

do step 10 or long

E=00 displays. See

press do step 11.

Manual 310893.

 

10.Short press DTS button again and SOFTWARE REV scrolls through dis- play followed by revision level; e.g., 02.

11.Press and hold (8 sec- onds) DTS button to move to WatchDog Trig- ger % menu. Continue to hold DTS button and WatchDog can be set to trigger at 30, 40, 50 or 60% of current sprayer pressure setting. Release DTS button when desired % is dis- played. Default is 50%.

310892F

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 311861 310893 311046310894 Read warnings and instructionsManual Conventions Fire and Explosion Hazard Equipment Misuse Hazard Component Identification Setup Approximate Fill Level Cold Change Engine to Motor Convertible ModelsChange Motor to Engine Startup Start engine Choke to open Setting Flush One seal SwitchTip and Guard AssemblyClearing Tip Clogs Main Menu Premium OperationDigital Tracking System DTS Pressure/Volume WatchDog Protection SystemChange Display Units To Activate Do Startup Sprayer model momen- tarily displays, e.g., G5900 = Gmax ll Short press DTS button and date code displays Now short press Do or longPress do step Ti6219a Ti5822a Pressure Relief Procedure CleanupFlush 20 SEC Increase sprayer life Hand tighten gun Onto gun Handle Warranty / Garantie / Garantía / Garanzia / Garantia Graco Headquarters Minneapolis
Top Page Image Contents