Graco 310829F manual Flush

Page 24

Cleanup

				/.
				ti5978a
			-!4%2)!,
	ti5832a	FLUSH	&,53(
	ti5832a
			ti5833a
			ti5833a
				ti5979a
ti5831a
5. Unscrew bowl, remove	6. Clean filter, guard and		7. Remove siphon tube set	8. Turn engine ON and
filter. Assemble without	SwitchTip in flushing		from material and place	start engine.
filter. Clean fliter.	fluid.		in flushing fluid.
				Set pump switch ON.
			Use water for water
			base material and	Turn prime valve
			appropriate solvent for	horizontal.
			oil base material.

24

310892F

Image 24

Contents 310893 311046 311861310894 Read warnings and instructionsManual Conventions Fire and Explosion Hazard Equipment Misuse Hazard Component Identification Setup Approximate Fill Level Cold Convertible Models Change Engine to MotorChange Motor to Engine Startup Start engine Choke to open Setting Flush SwitchTip and Guard Assembly One sealClearing Tip Clogs Premium Operation Main MenuDigital Tracking System DTS Pressure/Volume WatchDog Protection SystemChange Display Units To Activate Do Startup Sprayer model momen- tarily displays, e.g., G5900 = Gmax ll Short press DTS button and date code displays Now short press Do or long Press do step Ti6219a Ti5822a Cleanup Pressure Relief ProcedureFlush 20 SEC Increase sprayer life Hand tighten gun Onto gun Handle Warranty / Garantie / Garantía / Garanzia / Garantia Graco Headquarters Minneapolis