Graco 3A0732J important safety instructions Equipment Misuse Hazard

Page 5

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

•Do not leave the work area while equipment is energized or under pressure. Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufacturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

•Keep clear of moving parts.

•Do not operate equipment with protective guards or covers removed.

•Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure and disconnect all power sources.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDSs to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

3A0732J

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents II 2 G c T5 Merkur ES Spray PackagesContents Models Fire and Explosion Hazard Equipment Misuse Hazard 3A0732J Air Line Accessories InstallationPrepare the Operator Prepare the Site Supplied ComponentsWall Mount Packages Flush Before Using EquipmentGrounding Fluid supply container follow your local codeKey SetupOperation Pressure Relief ProcedureTrigger Lock Prime the PumpAdjust the Atomization Install the Spray TipExample Pump Air Regulator Pump Increment Fluid Pressure Ratio Psi MPa, barFollow Pressure Relief Procedure, Adjust the Spray PatternShutdown No air Too little air Correct Amount AirFlush the Pump MaintenanceTighten Threaded Connections Problem Cause Solution TroubleshootingRepair Disconnect the Displacement PumpGeneral Information To Remove Intake Valve OnlyReassemble the Pump Reconnect the Displacement PumpDisassemble the Pump Displacement Pump Disassemble the Air Valve Repair Air ValveAir Valve Assembly Reassemble the Air Valve Replace Pilot ValvesReconnect the Air Motor Disconnect the Air MotorRepair Air Motor Air Motor U-cup InstallationAir Motor Assembly See Reconnect the Air Motor on Align Shield in Grooves on CoversDetail of Stand Kit PartsPackage Parts Plug Package Parts 151 Ratio PumpsPackage Parts 301 Ratio Pumps Parts Airless Packages Hose and GunPart No G701, Plated Steel Part No G702, Stainless Steel Displacement Pump PartsDescription 24G701 24G702 Qty Air Motor Parts 24G693 24G694 In. Motor Air Valve Parts Description 24A537 24A535 24A360 Air Valve Qty Repair KitEnd Cap Kit Air Control Parts Description 24H162 24H163 24H164 24H165 Qty Kits and Accessories Package Weights Package DimensionsWall Bracket Mounting Hole Diagram Technical Data Fluid Outlet Pressure psi MPa, bar Cycles per Minute Performance ChartsRatio Pumps Ratio Pumps Graco Information Graco Standard Warranty

3A0732J specifications

The Graco 3A0732J is a versatile and efficient airless paint sprayer that is designed to meet the needs of both professionals and DIY enthusiasts. Known for its high performance and reliability, this model stands out in the market for its ease of use and advanced features.

One of the key features of the Graco 3A0732J is its powerful motor, which allows for the sprayer to deliver a consistent and high-output performance. With a maximum tip size of up to .017 inches, it is well-suited for a variety of applications, including interior walls, ceilings, and even exterior surfaces. This capability makes it an ideal choice for both small and large projects, providing the flexibility to handle different painting jobs with ease.

The sprayer is equipped with Graco’s exclusive ProXChange pump technology, which enables users to easily swap out the pump without any tools required. This feature not only reduces downtime but also enhances the efficiency of the painting process. Additionally, the Graco 3A0732J utilizes a reliable and durable design, ensuring that it withstands the rigors of heavy use while maintaining a high level of performance.

Another notable characteristic of this sprayer is its adjustable pressure control. Users can easily modify the pressure settings to suit the specific requirements of different projects, which helps to achieve a smooth and even finish. This adaptability makes the Graco 3A0732J suitable for various coatings, from paints and stains to sealers.

Moreover, the built-in suction hose allows for easy material pickup from any container, offering users the freedom to use their preferred paint or coating without limitation. This feature is particularly appealing for those who wish to utilize bulk materials or different paint types.

The Graco 3A0732J also emphasizes portability and convenience. It features a lightweight design and an integrated handle, making it easy to transport from one job site to another. Additionally, the sprayer's compact size ensures efficient storage when not in use.

In summary, the Graco 3A0732J is a highly functional airless paint sprayer that combines power, flexibility, and user-friendly features. Its advanced technologies, such as ProXChange pump exchange and adjustable pressure control, make it a reliable choice for anyone looking to achieve professional-grade results in their painting projects. Whether for home improvement tasks or larger commercial jobs, this sprayer stands out for its performance and durability.
Top Page Image Contents