Graco 288048 important safety instructions Dimensions

Page 27

Dimensions

Dimensions

2.0 in. (50.8 mm)

TI8113a

3.86 in. (98.0 mm)

5.23 in. (139.7 mm)

3.0in.

(76.2 mm)

0.5 in.

(12.7 mm)

1.375 in.

(34.9 mm)

2.0 in.

(50.8 mm)

2.245 in.

(57.02 mm)

TI8114a

FIG. 19

311053H

27

Image 27

Contents Model 288048 Shown Automatic Airless Spray GunsContents Equipment Misuse Hazard Pressurized Equipment Hazard Non-circulating System InstallationVentilate Spray Booth Configure Gun and ManifoldGround System Install Air FittingsAll Manifolds Mount GunReciprocating Arm Rod Mount Stationary Support MountSetup KEY Manifolds 288219Flush Spray Gun Install Spray TipAdjust Spray Pattern Adjust a Streaming TipIncorrect Pressure Relief ProcedureOperation Apply the FluidDaily Gun Care Perform Pressure Relief Procedure, General System MaintenanceDaily Cleaning Procedure Daily Flushing ProcedureTroubleshooting General TroubleshootingProblem Cause Solution Problem Cause Solution Spray Pattern Troubleshooting Disassembly ServiceService Notes Reassembly Model Parts11† Ref. only TIP see GG0 Series Tip Selec Tion Charts, PartsPart No. Description Qty North America and International Manifold Description QtyGG0 Series Spray Tips GG0 Series Tip Selection ChartsSingle Orifice Fan Pattern Spray Tips Sealer Application Tip and Air Cap Selection ChartsShower Tip Streaming TipsAccessories Dimensions Manifold Mounting Hole Layout Mounting Hole LayoutSound Pressure Levels dBa Technical DataSound Power Levels dBa Triggering SpeedGraco Information Graco Standard Warranty