Graco 288048 important safety instructions Manifolds 288219, Key

Setup

Manifolds 288219 and 288220 Manifold 244930

6.In a circulating system, connect an electrically con- ductive fluid hose to the gun fluid outlet (G).

In a non-circulating system, remove the gun fluid outlet fitting (G) and plug the outlet port with the pipe plug (109) supplied.

KEY

C Cylinder Air Inlet: accepts 1/4 in. (6.3 mm) O.D. tubing

FFluid Inlet: 1/4-18 nptf or #5 JIC (1/2-20 unf)

GFluid Outlet (circulating gun only): 1/4-18 nptf or #5 JIC (1/2-20 unf)

G (or F)

C

F (or G)

7.This manifold is equipped with passages for circulat- ing water to maintain the temperature of the gun. Ports provided are:

•Side water inlet, 1/4 npt(f)

•Top water outlets, 1/8 npt(f)

•Side RTD sensor, 1/8 npt(f)

See Accessories, page 26, for available fittings and sensors.

KEY

L Water Outlet: 1/8 npt(f)

M Air Inlet (to open valve): 1/8 npt(f)

N Fluid Inlet: 3/8(f)

P Water Inlet: 1/4 npt(f)

FAN ATOM

CYL

TI8113a

FIG. 5

L

M

L

N

TI8115a

P TI8116a

FIG. 6

311053H 9