Graco 230-978, 230-998, 231-015 manual Injection Hazard, 307±636

Page 3

WARNING

INJECTION HAZARD

Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.

DFluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate medi- cal attention.

DDo not point the gun at anyone or at any part of the body.

DDo not put your hand or fingers over the spray tip.

DDo not stop or deflect leaks with your hand, body, glove or rag.

DDo not ªblow backº fluid; this is not an air spray system.

DAlways have the tip guard and the trigger guard on the gun when spraying.

DCheck the gun diffuser operation weekly. Refer to the gun manual.

DBe sure the gun trigger safety operates before spraying.

DLock the gun trigger safety when you stop spraying.

DFollow the Pressure Relief Procedure on page 10 whenever you: are instructed to relieve pres- sure; stop spraying; clean, check, or service the equipment; and install or clean the spray tip.

DTighten all fluid connections before operating the equipment.

DCheck the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose.

DUse only Graco approved hoses. Do not remove any spring guard that is used to help protect the hose from rupture caused by kinks or bends near the couplings.

307±636 3

Image 3
Contents Model 230±978 Series B 307±636Model 230±998, Series B Model 231±015Table of Contents Symbols 307±636 307±636 Injection HazardFire and Explosion Hazard 307±636 Grounding InstallationManual Component All Models See FigAssembling Sprayer Model 230±978 See Fig Assembling Sprayer Model 231±015 See FigA40 Detail aPressure Relief Procedure Operation10 307±636 Manual Air Motor Lubrication To Operate the PumpAA2000 Spray Gun Operation Shutdown and Care12 307±636 PartsModel 230±998, Series B Model 231±015Model 230±978, Series B 14 307±636 Technical DataManual Change Summary Category Data307±636 16 307±636 Graco Standard WarrantyGraco Phone Number ±800±367±4023 Toll Free