Installation
Assembling Sprayer Model 231±015 (See Fig 2)
Connect the gun air supply hose (71) between the air inlet (A) of the gun (70) and the nipple (14) at the outlet of the gun air regulator (B).
Connect the gun fluid supply hose (72) between the gun fluid inlet (C) and the ball valve (D) mounted in the side outlet of the fluid filter (25).
WARNING
To reduce the risk of serious injury, never connect a fluid hose to the drain valve (E) mounted in the bottom outlet of the fluid filter (25). This valve is for use only as a drain valve, to relieve fluid pressure in the system during shutdown.
Assembling Sprayer Model 230±978 (See Fig 2)
Remove the plug button (64) from the hole (F) in the pail cover (40).
Assemble the fluid regulation kit (75) as shown in Detail A and Detail B of Fig 2. Install the regulator mounting bracket (75k) on the regulator (75f), using the two screws (75p) and lockwashers (75q). Mount the assembled regulator kit on the pail cover with the capscrew (75l), washer (75m) and nut (75n). Connect the regulator hose (75h) between the nipple (75b) at the regulator inlet (G) and the ball valve (D) mounted in the side outlet of the fluid filter (25).
Connect the gun air supply hose (71) between the air inlet (A) of the gun and the nipple (14) at the outlet of the gun air regulator (B).
Connect the gun fluid supply hose (72) between the gun fluid inlet (C) and the nipple (75b) mounted in the pipe cross (75c).
WARNING
To reduce the risk of serious injury, never connect a fluid hose to the drain valve (E) mounted in the bottom outlet of the fluid filter (25) or the drain valve (75a) mounted in the pipe cross (75c) of the fluid regulation kit. These valves are for use only as drain valves, to relieve fluid pressure in the system during shutdown.