Graco 24G980, 238377 important safety instructions Remove gun needle from valve body

Page 7

4.Use an open-end wrench to remove valve seat from valve housing.

ti16345a

5. Remove gun needle from valve body.

ti16347a

6. Remove packing nut from the valve body.

ti16346a

7. Remove packings (16, 17, 18, 20) from valve body.

ti16348a

Service

8. Clean all parts.

ti16194a

9. Lubricate and install gun needle into valve body.

ti16349a

10. Install packings (16, 17, 18, 20) on gun needle.

ti16350a

11. Install packing nut and hand-tighten into valve body.

ti16351a

308613E

Image 7

Contents 238377 24G980 308613ESingle Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping SystemSkin Injection Hazard Fire and Explosion HazardTreatment Toxic Fluid or Fumes Hazard Equipment Misuse HazardConnect the Air Lines InstallationConnect Fluid Lines Mount ValveApplication Data AdjustmentsPressure Relief Procedure OperationOil Dispensing Valve Daily MaintenanceService Clean Dispensing Valve and System DailyRemove gun needle from valve body Air Piston, Spring and Seal Part Description Replacement Parts and Kits Double Acting Gun 24G980Part Description Qty Replacement Parts and Kits Single Acting GunDouble Acting Paint Gun 238377 24G980 Technical DataGraco Information Graco Standard Warranty