Graco 238377, 24G980 important safety instructions Air Piston, Spring and Seal

Page 8

Service

12. Install seat valve into valve housing.

ti16352a

13. Install valve body. Tighten nut.

ti16196a	ti16193a

14. Install RAC guard.

ti16353a

Air Piston, Spring and Seal

Perform Pressure Relief Procedure, page 5. Remove valve as explained on page 6. Remove air cylinder cap, take out spring and pull out the piston. Clean and inspect all parts. Check the piston o-rings (see note 1) carefully. Lubricate all parts with a light waterproof grease and reassemble with valve using new parts as necessary.

Single-Acting	Double-Acting
238377	24G980

1

1

1	1

ti16999a

ti16792a

8

308613E

Image 8

Contents 308613E Single Acting and Double Acting Paint Spray Guns forRoadLazer RoadPak Line Striping System 238377 24G980Treatment Fire and Explosion HazardSkin Injection Hazard Equipment Misuse Hazard Toxic Fluid or Fumes HazardInstallation Connect Fluid LinesMount Valve Connect the Air Lines Adjustments Pressure Relief Procedure Operation Application DataMaintenance ServiceClean Dispensing Valve and System Daily Oil Dispensing Valve DailyRemove gun needle from valve body Air Piston, Spring and Seal Replacement Parts and Kits Double Acting Gun 24G980 Part DescriptionReplacement Parts and Kits Single Acting Gun Part Description QtyTechnical Data Double Acting Paint Gun 238377 24G980Graco Standard Warranty Graco Information