Graco Inc 243382, 243238, SG3-A, SG3-E manual 3Z9097

Page 2

WARNING

Fire and explosion hazard: Solvent and paint fumes can ignite or explode.

To help prevent a fire and explosion:

DUse in an extremely well ventilated area.

DEliminate all ignition sources; such as pilot lights, cigarettes and static arcs from plastic drop cloths. Do not plug or unplug power cords or turn lights on or off in spray area.

DGround Sprayer, object being sprayed, paint and solvent pails. DHold gun firmly to side of grounded pail when triggering into pail. DUse only conductive airless paint hose.

DDo not use 1,1,1-trichloroethane, methylene chloride, other haloge- nated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

Fluid injection and high pressure hazard: High pressure spray or

leaks can inject fluid into the body.

To help prevent injection, always:

DEngage trigger safety latch when not spraying. DKeep clear of nozzle and leaks.

DNever spray without a tip guard.

DDo PRESSURE RELIEF if you stop spraying or begin servicing sprayer.

DDo not use components rated less than sprayer Maximum Working Pressure.

DNever allow children to use this unit.

DBrace yourself; gun may recoil when triggered.

If high pressure fluid pierces your skin, the injury might look like “just a cut”. But it is a serious wound! Get immediate medical attention.

23Z9097

Image 2
Contents 3Z9097 Instructions3Z9097 Pressure Relief Adjust Spray Adjust Needle Parts List Parts DrawingGraco Standard Warranty Graco INC. P.O. BOX 1441 MINNEAPOLIS, MN