Graco Inc 312414J important safety instructions AirPro Pressure Feed Airspray Gun

Page 1

Instructions-Parts

AirProPressure Feed Airspray Gun

312414J

ENG

Conventional, HVLP, and compliant guns for specialty industrial applications. For professional use only.

100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure

300 psi (2.1 MPa, 21 bar) Maximum Fluid Inlet Pressure

Important Safety Instructions

Read all warnings and instructions in

this manual. Save these instructions.

See page 3 for model information.

ti11094a

ll 2 G

Image 1
Contents AirPro Pressure Feed Airspray Gun Important Safety InstructionsContents Metal Spray Guns ModelsMetal with Stainless Steel Tip AutomotiveWaterborne StainHigh Wear AdhesivesFire and Explosion Hazard Conventional Guns Gun SelectionHvlp Guns Compliant GunsFlush Before Using Equipment SetupConnect Air and Fluid Lines Ground the GunAdjust Spray Pattern Operation Pressure Relief ProcedureApply Fluid Volatile Organic Compounds VOC RegulationGeneral Tasks Daily Gun MaintenanceFlush Compliant Cleaning Methods Clean GunProblem Cause Solution TroubleshootingRight WrongTroubleshooting Follow Pressure Relief Procedure, DisassemblyRepair Reassembly Parts Needle Part Description QtyParts Part No. Description AccessoriesGeneral Metal Spray Guns Repair KitsGeneral Metal with Stainless Steel Tip Stain AutomotiveSpatter Air BrushHigh Wear WaterborneNeedle Tips Air Inlet Pressure Technical DataSpray Type Application Psi MPa, bar Scfm Graco Information Graco Standard Warranty