Graco Inc 311797J important safety instructions Fire and Explosion Hazard

Page 3

Models

Warnings

The following Warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. Refer back to these Warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

Ground all equipment in the work area. See Grounding instructions.

Use only grounded hoses.

Hold gun firmly to side of grounded pail when triggering into pail.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Keep a working fire extinguisher in the work area.

SKIN INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Do not point gun at anyone or at any part of the body.

Do not put your hand over the spray tip.

Do not stop or deflect leaks with your hand, body, glove, or rag.

Do not spray without tip guard and trigger guard installed.

Engage trigger lock when not spraying.

Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power cord before servicing equipment.

Use only grounded electrical outlets.

Use only 3-wire extension cords.

Ensure ground prongs are intact on sprayer and extension cords.

Do not expose to rain. Store indoors.

311797J

3

Image 3
Contents GH 130, GH GH 230, GH Hydraulic Sprayers Electric Motor Kit Options ModelsFire and Explosion Hazard Moving Parts Hazard Item No Component Component IdentificationGeneral Repair Information Grounding SAE O-Ring InstallationPressure Relief Procedure MaintenanceProblem Cause Solution Troubleshooting311797J Installation Hydraulic PumpRemoval 227 Fan Belt Engine Hydraulic Motor Rebuild Removal Installation266 265 Test hole 288 271 Hydraulic Oil/Filter Change Figures Displacement PumpSlide coupler cover 193 up to fully expose rod couplers Displacement Pump ProConnectSupport pump with your hand before opening t-handle Install pin 311797J All Sprayers PartsPart Description Qty Parts List All SprayersParts Drawing Engines WASHER, GH300 Parts Drawing All Sprayers Plug Parts Drawing All Sprayers GH200/230/300GH130 Ref. Part Description Qty 267 268 269 266 265 Ref. Part Description Parts ListGH 230 & 300 Sprayers with Spray Gun and Hoses GH 130 & 200 Sprayers with Spray Gun and HosesSound Levels Dimensions311797J 311797J For Graco Canada Customers Graco Standard Warranty