Graco Inc 311797J important safety instructions Moving Parts Hazard

Page 4

Models

WARNING

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

SUCTION HAZARD

Never place hands near the pump fluid inlet when pump is operating or pressurized. Powerful suction could cause serious injury.

CARBON MONOXIDE HAZARD

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon monoxide can cause death. Do not operate in an enclosed area.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

4

311797J

Image 4
Contents GH 130, GH GH 230, GH Hydraulic Sprayers Models Electric Motor Kit OptionsFire and Explosion Hazard Moving Parts Hazard Component Identification Item No ComponentGrounding SAE O-Ring Installation General Repair InformationMaintenance Pressure Relief ProcedureTroubleshooting Problem Cause Solution311797J Hydraulic Pump InstallationRemoval 227 Fan Belt Engine Removal Installation Hydraulic Motor Rebuild266 265 Test hole 288 271 Hydraulic Oil/Filter Change Displacement Pump FiguresDisplacement Pump ProConnect Slide coupler cover 193 up to fully expose rod couplersSupport pump with your hand before opening t-handle Install pin 311797J Parts All SprayersParts List All Sprayers Part Description QtyParts Drawing Engines WASHER, GH300 Parts Drawing All Sprayers Plug Parts Drawing All Sprayers GH200/230/300GH130 Ref. Part Description Qty 267 268 269 266 265 Parts List Ref. Part DescriptionGH 130 & 200 Sprayers with Spray Gun and Hoses GH 230 & 300 Sprayers with Spray Gun and HosesDimensions Sound Levels311797J 311797J Graco Standard Warranty For Graco Canada Customers