Graco Inc 308972 manual Table of Contents, Symbols

Page 2

Table of Contents

Warnings

. 2

Displacement Pump Service

16

Component Identification

. 5

Sprayer Parts Drawing

18

Setup

. 5

Sprayer Parts List

25

Flushing

. 8

Accessories

27

Operation

10

Technical Data

27

Maintenance

12

Graco Phone Number

27

Troubleshooting

13

Graco Warranty

28

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to equipment if you do not follow the instructions.

INSTRUCTIONS

WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 27 for the maximum working pressure of this equipment.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer's warnings.

DDo not use hoses to pull equipment.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 82_C (180_F) or below ±40_C (±40_F).

DDo not lift pressurized equipment.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

DWear hearing protection when operating this equipment.

DDo not use 1,1,1±trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

2308972

Image 2
Contents Read and Keep for Reference 308972This manual contains important warnings and information ModelTable of Contents SymbolsInjection Hazard Fire and Explosion Hazard Fire Skin Injection Explosion HazardConnect the Hose and Gun SetupComponent Identification Check the Engine Oil Level Grade of OIL ChartCheck the Hydraulic Oil Level Grounding Fire and Explosion HazardFlushing When to FlushHow to Flush Startup after storageFlushing Prepare the Fluid Pressure Relief ProcedureOperation Starting the SprayerPrime the Pump Cleaning a Clogged TipAdjusting the Intake Valve Ball Travel Maintenance Troubleshooting Problem7876A Dimension a 0.05º Mm ±0.254 108 BReconnecting the Displacement Pump Displacement Pump Service210±208 Displacement Pump Disconnect the Displacement Pump Relieve the pressure GH5030 Roof Rig Parts Drawing GH3640 Roof Rig Parts Drawing GH2560 Roof Rig Parts Drawing GH2075 Roof Rig Parts Drawing GH1015 Roof Rig Parts Drawing Roof Rigs Sprayer Parts Drawing Models 687100, 687327 965171 9651657879A Roof Rigs Parts List Description QTYPage Graco Phone Number Technical DataAccessories GRACO±APPROVED Hydraulic FluidFor Graco Canada Customers Graco WarrantyAdditional Warranty Coverage