Graco Inc important safety instructions Instructions - Parts List, Model 208008, Series D

Page 1
Instructions – Parts List

Instructions – Parts List

STAINLESS STEEL

Hydra–CleanrSpray Gun 307010L

1000 psi (6.9 MPa, 69 bar) Maximum Working Pressure

Model 208008, Series D

Spray tip not included, purchase separately. See page 12 for Tip Selection Chart.

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

See page 2 for Table of Contents.

8106

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Copyright 1971, Graco Inc. is registered to I.S. EN ISO 9001

Image 1
Contents Model 208008, Series D Instructions - Parts ListHydra-Cleanr Spray Gun 307010L STAINLESS STEELSymbols Table of ContentsWarning Symbol Caution SymbolSKIN INJECTION HAZARD FIRE AND EXPLOSION HAZARDPressure Relief Procedure SetupGrounding Installation Operation Cleaning and Clearing the Spray Tip Adjust the Spray PatternFlushing the Gun Troubleshooting Needle Adjustment ServiceSwivel Repair Gun Repair See Fig 1/4 nptf Parts†24 †23 †25 3/8 nptfBlasting Tips and Stainless Steel Tip Selection ChartsStainless Steel Included in Repair KitTechnical Data Graco Information Graco Standard WarrantyGRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN Graco reserves the right to make changes at any time without notice