OPERATIONS
Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.
Like all tools there is potential danger when operating this tool. Accidents are frequently caused by lack of familiarity or failure to pay attention. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
Tank Setup
To use your paint tank:
1.Thoroughly mix and strain your paint to remove undissolved particles that could block the flow of material to the gun.
2.Pour paint into the tank.
3.Place the lid assembly on the tank and evenly hand tighten the lid clamp but- terfly nuts.
4.Adjust the regulator at your air com- pressor to 50 PSI.
5.Fully turn the paint tank regulator knob counterclockwise to shut OFF the tank regulator.
6.Connect the paint tank to the air com- pressor.
7.Adjust the paint tank to 20 PSI on the tank gauge. Normal operating tank pressure is
8.Adjust the regulator at the spray gun.
9.Start by testing the spray gun at a low setting, then increase the air pressure as needed for satisfactory results.
Model H8226 5 Gallon Automatic Mixing Paint Tank |