7.AVOID ENTANGLEMENTS. Do not wear loose clothing, gloves, neck- ties, rings, bracelets, or other jewel- ry, which may get caught in moving parts, when operating this tool. Wear a protective hair covering to contain long hair.
8.USE CORRECT AIR PRESSURE. Exceeding the maximum PSI rating of this tool may cause unpredictable operation or bursting.
9.DISCONNECT AIR PRESSURE before servicing, changing accesso- ries, or moving to another location. Never leave this tool unattended when connected to air.
10.SECURE TOOLING. Always verify tooling is secure before operation.
11.SHARP SURFACES. DO NOT place hands near the tooling sur- faces when in operation.
12.REMOVE ADJUSTING KEYS AND WRENCHES AFTER USE. These tools become dangerous projectiles if left on the tool when it is started.
13.AVOID FLAMMABLES. Do not use this tool around any flammables that may be ignited by sparks.
14.SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool.
15.MAINTAIN TOOLS WITH CARE. Keep tools lubricated and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
16.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
17.CHECK FOR DAMAGED PARTS BEFORE USING. Check for bind- ing and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect operation. Repair or replace damaged parts before operating.
18.USE GOOD LIGHTING. Keep work area well lighted. Dark work areas increase risk of accidental injury.
19.AVOID UNINTENTIONAL OPERA- TION. Always disconnect air when not in use, and do not carry tool with hand on trigger.
20.USE THE RECOMMENDED ACCESSORIES. Consult owner’s manual for recommended acces- sories. Using improper accessories may increase the risk of injury.
21.NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL WHILE UNSUPERVISED.
22.IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING TOOL. Seek formal training or research books or magazines that specialize in pneumatic tools.
23.BE AWARE OF HOSE LOCATION. Hoses can easily become a tripping hazard when laid across the floor in a disorganized fashion.
24.DO NOT USE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL, OR WHEN TIRED.
Model H8226 5 Gallon Automatic Mixing Paint Tank |