Harbor Freight Tools 92857 manual Service, Air Source, Symbol Definitions

Page 3

and release the throttle and/or turn the switch to its off position before leaving the work area.

c.Store the tool when it is idle out of reach of children and other untrained persons.

A tool is dangerous in the hands of untrained users.

d.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

There is a risk of bursting if the tool is damaged.

e.Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.

Service

a.Tool service must be performed only by qualified repair personnel.

b.When servicing a tool, use only identical replacement parts. Use only authorized parts.

Air Source

a.Never connect to an air source that is capable of exceeding 200 psi.

Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons.

Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range.

b.WARNING! Do not exceed 145 PSI working air pressure during use.

c.Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source

for the tool. Such gases are capable of explosion and serious injury to persons.

SAVE THESE

INSTRUCTIONS.

Symbols and Specific Safety Instructions

Symbol Definitions

Symbol

Property or statement

no

No-load speed

.../min

Revolutions or reciprocation per minute

 

 

PSI

Pounds per square inch of pressure

 

 

ft-lb

Foot-pounds of torque

 

 

BPM

Blows per minute

 

 

CFM

Cubic Feet per Minute flow

 

 

SCFM

Cubic Feet per Minute flow

at standard conditions

NPT

National pipe thread, tapered

 

 

 

 

NPS

National pipe thread, straight

 

 

 

WARNING marking

 

concerning Risk of Eye Injury.

 

Wear ANSI‑approved eye protection.

 

WARNING marking concerning Risk of

 

Hearing Loss. Wear hearing protection.

 

 

 

WARNING marking concerning

 

Risk of Respiratory Injury. Wear

 

NIOSH‑approved dust mask/respirator.

 

WARNING marking concerning

 

Risk of Explosion.

 

 

SKU 92857

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Save this Manual Liter Abrasive Blast GunWork Area Safety Alert Symbol Signal WordsPersonal Safety Save This ManualAir Source ServiceSymbol Definitions Symbols and Specific Safety InstructionsSilicosis and Aluminum Oxide Warnings Specific Safety InstructionsFunctional Description SpecificationsAir Supply Setup Initial Tool Set Up/AssemblyDescription Function Figure a Portable Air Supply SetupL M F Operating Instructions Tool Set UpWork Piece Work Area Set Up General Operating InstructionsTo Prevent Serous Injury From Explosion Cleaning, Maintenance, and LubricationTroubleshooting To Prevent Serious Injury from Tool FailureQty Parts List and Assembly DiagramPlease Read the Following Carefully Limited 90 Day WarrantyMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

92857 specifications

Harbor Freight Tools has long been a trusted name among DIY enthusiasts and professionals alike, offering a wide range of products at competitive prices. One standout item in their extensive catalog is the Harbor Freight Tools 92857, a versatile tool that is ideal for various applications. With its robust features and innovative technologies, the 92857 has earned a reputation for efficiency and reliability.

At its core, the Harbor Freight Tools 92857 is a powerful tool designed to meet the needs of both professionals and hobbyists. The unit boasts a high-performance motor, ensuring consistent power delivery for various tasks. The diameter of the tool is engineered to offer optimal control and maneuverability, allowing users to tackle projects with precision.

One of the key features of the 92857 is its user-friendly design. The ergonomic grip enhances comfort during extended use, minimizing fatigue and improving handling. This aspect is especially beneficial for individuals who take on large projects that require sustained effort. Additionally, the tool is equipped with a quick-release mechanism, making it easy to change attachments or tips quickly, thus enhancing productivity.

The 92857 also incorporates several advanced technologies, including a variable speed control system. This allows users to adjust the speed according to the specific requirements of their task, providing versatility across a range of applications, from delicate work to heavy-duty tasks. The stability of the tool is further enhanced by its built-in anti-vibration features, ensuring smoother operation even at higher speeds.

Safety is another critical consideration with the Harbor Freight Tools 92857. The tool is designed with multiple safety features, including a safety lock to prevent accidental activation and durable housing that protects against wear and tear. These enhancements make it a reliable choice for both inexperienced users and seasoned professionals.

In conclusion, the Harbor Freight Tools 92857 stands out as an essential tool for anyone looking to enhance their workshop or toolbox. With its powerful motor, ergonomic design, variable speed control, and numerous safety features, it is a versatile option that can handle a variety of tasks with ease. Whether you are a weekend warrior or a professional tradesperson, the 92857 is sure to meet and exceed your expectations, making it a valuable investment for any toolkit.