Harbor Freight Tools 92857 manual Tool Set Up, Work Piece Work Area Set Up, Operating Instructions

Page 8

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired.

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY:

Do not adjust or tamper with any control or component in a way not specifically explained within this manual. Improper adjustment can result in tool failure or other serious hazards.

Work Piece and

Work Area Set Up

1.Designate a work area that is clean and well‑lit. The work area must not allow access by children or pets to prevent distraction and injury.

2.Route the air hose along a safe route to reach the work area without creating a tripping hazard or exposing the air hose to possible damage. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working.

3.There must not be hazardous objects (such as utility lines or foreign objects) nearby that will present a hazard while working.

CAUTION! Prior to sandblasting, protect other people (and property) in the work area from flying debris by providing barriers or shields. Always wear appropriate clothing and safety gear when operating the Abrasive Blast Gun.

General Operating Instructions

1.If possible, place the workpiece inside a sandblast cabinet (not included). Otherwise, isolate the workpiece to make sure no damage can occur to nearby walls, tools, equipment, or other property.

2.Fill the Container (3) with 1 liter of clean, dry blasting media. Walnut Shells (SKU 92155 and 92150)

or aluminum oxide (SKU 99945) are available at Harbor Freight Tools. WARNING! Do not use sand as blasting media as sand may clog blast gun and damage the nozzle. Do not reuse blasting media.

3.Place the Gun Body (1) on top of the Container and turn clockwise until fastened securely.

NOTE: To keep the beads from accidentally spilling out, do not point the Gun Body downward.

4.Connect the compressor’s air hose to the Gun Body. Turn the compressor’s regulator to between

90-145 PSI. WARNING! Do not exceed 145 PSI.

5.Turn on the compressor and grip the Blast Gun firmly with both hands.

NOTE: Test the spray pattern and intensity of the Blast Gun on a piece of scrap material.

6.Aim the Gun Body toward the object that is to be sandblasted. Then squeeze the trigger to turn on the Blast Gun.

7.Adjust the flow of abrasive media by turning the knurled adjustment ring on the nozzle. Turn clockwise to reduce flow and counterclockwise to increase flow.

8.Use the Hook (4) to hang the Blast Gun during use, if desired. WARNING! Do not leave Blast Gun hanging unattended.

9.To refill the Container, release pressure on the trigger. Turn off the air compressor and squeeze the Trigger once again to release any compressed air. Then twist off Container and refill.

10.When finished using the Blast Gun, release pressure on the trigger. Turn off the air compressor. Squeeze the trigger once to release any compressed air.

Disconnect the Blast Gun from its air supply.

NOTE: Always dispose of used abrasive bead media according to local solid waste guidelines.

11.Clean, then store the tool indoors out of children’s reach.

Page 8

For technical questions, please call 1-800-444-3353.

SKU 92857

Image 8
Contents Liter Abrasive Blast Gun Save this ManualSafety Alert Symbol Signal Words Personal SafetySave This Manual Work AreaService Symbol DefinitionsSymbols and Specific Safety Instructions Air SourceSpecific Safety Instructions Silicosis and Aluminum Oxide WarningsSpecifications Air Supply SetupInitial Tool Set Up/Assembly Functional DescriptionFigure a Portable Air Supply Setup Description FunctionL M F Tool Set Up Work Piece Work Area Set UpGeneral Operating Instructions Operating InstructionsCleaning, Maintenance, and Lubrication TroubleshootingTo Prevent Serious Injury from Tool Failure To Prevent Serous Injury From ExplosionParts List and Assembly Diagram QtyLimited 90 Day Warranty Please Read the Following CarefullyMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

92857 specifications

Harbor Freight Tools has long been a trusted name among DIY enthusiasts and professionals alike, offering a wide range of products at competitive prices. One standout item in their extensive catalog is the Harbor Freight Tools 92857, a versatile tool that is ideal for various applications. With its robust features and innovative technologies, the 92857 has earned a reputation for efficiency and reliability.

At its core, the Harbor Freight Tools 92857 is a powerful tool designed to meet the needs of both professionals and hobbyists. The unit boasts a high-performance motor, ensuring consistent power delivery for various tasks. The diameter of the tool is engineered to offer optimal control and maneuverability, allowing users to tackle projects with precision.

One of the key features of the 92857 is its user-friendly design. The ergonomic grip enhances comfort during extended use, minimizing fatigue and improving handling. This aspect is especially beneficial for individuals who take on large projects that require sustained effort. Additionally, the tool is equipped with a quick-release mechanism, making it easy to change attachments or tips quickly, thus enhancing productivity.

The 92857 also incorporates several advanced technologies, including a variable speed control system. This allows users to adjust the speed according to the specific requirements of their task, providing versatility across a range of applications, from delicate work to heavy-duty tasks. The stability of the tool is further enhanced by its built-in anti-vibration features, ensuring smoother operation even at higher speeds.

Safety is another critical consideration with the Harbor Freight Tools 92857. The tool is designed with multiple safety features, including a safety lock to prevent accidental activation and durable housing that protects against wear and tear. These enhancements make it a reliable choice for both inexperienced users and seasoned professionals.

In conclusion, the Harbor Freight Tools 92857 stands out as an essential tool for anyone looking to enhance their workshop or toolbox. With its powerful motor, ergonomic design, variable speed control, and numerous safety features, it is a versatile option that can handle a variety of tasks with ease. Whether you are a weekend warrior or a professional tradesperson, the 92857 is sure to meet and exceed your expectations, making it a valuable investment for any toolkit.