Harbor Freight Tools 92857 manual Cleaning, Maintenance, and Lubrication, Troubleshooting

Page 9

User‑Maintenance Instructions

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment.

If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use.

TO PREVENT SEROUS INJURY

FROM EXPLOSION:

Lubricate the tool only with

specified lubricants. Lubricate the air inlet

using only pneumatic tool oil. Lubricate the internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion.

Cleaning, Maintenance, and Lubrication

Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool.

1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, clogged Nozzle, damaged supply hose, cracked or broken parts, and any other condition that may affect its safe operation. Do not use damaged equipment.

2.AFTER USE, clean external surfaces of tool with a clean, most cloth. If necessary, use a mild detergent. WARNING! Do not use solvents or immerse in liquids, as damage to Blast Gun may occur.

3.Store in a dry, secure area out of reach of children.

Troubleshooting

Problem

 

Possible Causes

 

Likely Solutions

Tool will not start.

1. Compressor not on.

1.

Turn compressor on.

 

2.

Air line not connected properly.

2.

Check that air line is connected.

Blast flow surges /

Air pressure too low.

Increase air pressure.

Excessive abrasive

 

 

 

 

consumption.

 

 

 

 

Clogging and

Excessive debris in abrasive.

Purge and filter abrasive.

plugging of

 

 

 

 

blast flow.

 

 

 

 

Lack of abrasive

1.

Container empty.

1.

Fill Container.

flow.

2.

Moisture in abrasive

2.

Use dry abrasive.

 

3.

Not enough air pressure.

3.

Increase air pressure.

 

4.

Air hose kinked.

4.

Un-kink air hose.

 

5.

Excessive debris in abrasive.

5.

Clean or filter abrasive.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service.

SKU 92857

For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Save this Manual Liter Abrasive Blast GunPersonal Safety Safety Alert Symbol Signal WordsSave This Manual Work AreaSymbol Definitions ServiceSymbols and Specific Safety Instructions Air SourceSilicosis and Aluminum Oxide Warnings Specific Safety InstructionsAir Supply Setup SpecificationsInitial Tool Set Up/Assembly Functional DescriptionDescription Function Figure a Portable Air Supply SetupL M F Work Piece Work Area Set Up Tool Set UpGeneral Operating Instructions Operating InstructionsTroubleshooting Cleaning, Maintenance, and LubricationTo Prevent Serious Injury from Tool Failure To Prevent Serous Injury From ExplosionQty Parts List and Assembly DiagramPlease Read the Following Carefully Limited 90 Day WarrantyMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

92857 specifications

Harbor Freight Tools has long been a trusted name among DIY enthusiasts and professionals alike, offering a wide range of products at competitive prices. One standout item in their extensive catalog is the Harbor Freight Tools 92857, a versatile tool that is ideal for various applications. With its robust features and innovative technologies, the 92857 has earned a reputation for efficiency and reliability.

At its core, the Harbor Freight Tools 92857 is a powerful tool designed to meet the needs of both professionals and hobbyists. The unit boasts a high-performance motor, ensuring consistent power delivery for various tasks. The diameter of the tool is engineered to offer optimal control and maneuverability, allowing users to tackle projects with precision.

One of the key features of the 92857 is its user-friendly design. The ergonomic grip enhances comfort during extended use, minimizing fatigue and improving handling. This aspect is especially beneficial for individuals who take on large projects that require sustained effort. Additionally, the tool is equipped with a quick-release mechanism, making it easy to change attachments or tips quickly, thus enhancing productivity.

The 92857 also incorporates several advanced technologies, including a variable speed control system. This allows users to adjust the speed according to the specific requirements of their task, providing versatility across a range of applications, from delicate work to heavy-duty tasks. The stability of the tool is further enhanced by its built-in anti-vibration features, ensuring smoother operation even at higher speeds.

Safety is another critical consideration with the Harbor Freight Tools 92857. The tool is designed with multiple safety features, including a safety lock to prevent accidental activation and durable housing that protects against wear and tear. These enhancements make it a reliable choice for both inexperienced users and seasoned professionals.

In conclusion, the Harbor Freight Tools 92857 stands out as an essential tool for anyone looking to enhance their workshop or toolbox. With its powerful motor, ergonomic design, variable speed control, and numerous safety features, it is a versatile option that can handle a variety of tasks with ease. Whether you are a weekend warrior or a professional tradesperson, the 92857 is sure to meet and exceed your expectations, making it a valuable investment for any toolkit.
Top Page Image Contents