Setting UP to Spray

WARNING

If there are leaks, shut off the pump immediately and release system pressure follow the “Pressure Relief Procedure” then tighten connections, start the pump again and check to be sure leaking has stopped. Always use the lowest air pressure necessary to get the desired results, Higher pressures waste fluid and cause premature wear of the pump packings and spray tips. Never allow the pump to run dry of the fluid being pumped because a dry pump will quickly accelerate to a high speed, possibly damage itself.

If the pump accelerates quickly or is running too fast, shut off pump immediately and check the fluid supply.

NOTE:

The pump will stall out (stop) against the pressure without any damage to the pump.

Always follow the “Pressure Relief Procedure” before cleaning, or removing the equipment or servicing any part of system equipment.

•Immerse the pump intake or suction tube in paint. Make sure drain valve is open.

•Start the engine.

•Open the hydraulic ball valve to allow hydraulic fluid to flow to hydraulic motor.

•Paint pump should start to pump material and you should notice material flowing out to prime valve.

•Let the pump run until the material is flowing evenly out of prime valve.

•Close the prime valve and unit should now build up with pressure.

•Run the pump until paint flows smoothly from the gun, without spitting, release the trigger.

•Adjust the pump to the minimum pressure required to obtain the desired spray pattern of paint. If atomization is not possible on thick paints,

thin with the compatible solvent.

•Use the lowest pressure setting possible.

•If the pump accelerates quickly or is running too fast, stop the pump immediately and check the mate- rial supply.

•Don’t leave a pump shut off for a long period of time, if the material supply has been exhausted and

air has been pumped into the lines. This can cause

the	material possibly to dry in the lines.

•Prime the pump and lines with material or flush and leave filled with solvent, with the pressure relieved.

MAINTENANCE

DAILY SHUTDOWN PROCEDURE”

•Close the on-off air valve to the pump.

•Always be sure to stop the pump at the bottom of the stroke to prevent paint from drying on the displacement rod and damaging the throat packings.

•Always bleed off the paint pressure in the system by triggering the gun and opening the drain valve, making sure to have a container ready to catch the paint draining from the drain valve.

•Remove the tip from the gun and clean and leave it in solvent until ready to use again.

•Do not disconnect the gun or hoses, keep the unit filled with solvent to reduce the need for flushing.

NOTE:

−When using fast drying paints, immerse the suction tube in a container of solvent during shutdown.

−Clean the pump’s intake screen.

SHUTDOWN FOR STORAGE

Always follow the “Pressure Clearance Procedure” and when storing the unit proceed as follows:

•Flush the unit clean, as instructed . It may take re- peated flushing with solvent or water, to clean the sys- tem thoroughly.

•Fill the pump, hoses, and gun full of solvent. If the flushing solvent used as water or a keytone type solvent, fill the system with mineral spirits or light oil for storage over a long period. Wipe all external wet- ted parts of the pump with oil. Make sure that water or keytone solvent is removed from the wet cup/ packing nut.

HRO-ST3131

Page 8

Mar 8, 2004

HRO-ST3131 specifications

I.C.T.C. Holdings Corporation's HRO-ST3131 is a state-of-the-art solution designed for organizations looking to streamline their operational processes through advanced technology. This innovative system integrates cutting-edge features and technologies that cater to a wide array of industries, enhancing efficiency and productivity.

One of the standout characteristics of the HRO-ST3131 is its user-friendly interface, which facilitates easy navigation and operation. Designed with stakeholders of all technical backgrounds in mind, the system reduces the learning curve for new users, allowing for quicker onboarding and adaptation within organizations. This feature is particularly beneficial for companies that value agility and responsiveness in a rapidly changing business environment.

The HRO-ST3131 incorporates robust data management and analytics capabilities, empowering users to make informed decisions based on real-time data. By utilizing advanced algorithms and machine learning techniques, organizations can gain valuable insights into their operational performance, identify trends, and forecast future needs. This data-centric approach allows for more strategic planning and can significantly enhance overall business outcomes.

In terms of connectivity, the HRO-ST3131 supports a variety of communication protocols, which ensures seamless integration with existing systems and software platforms. This versatility is crucial for organizations that rely on multiple technologies to function effectively. The system also features cloud integration, which facilitates easy access to data from anywhere, thereby fostering collaboration and flexibility among teams.

Security is another key feature of the HRO-ST3131. With built-in encryption and access control mechanisms, the system ensures that sensitive information is protected from unauthorized access and breaches. As data privacy becomes increasingly important for businesses, the HRO-ST3131 addresses these concerns with a comprehensive security framework.

Finally, the HRO-ST3131 is designed for scalability, allowing organizations to expand their operations without overhauling their existing infrastructure. Whether a company is experiencing rapid growth or simply needs to adapt to changing market conditions, the HRO-ST3131 offers the flexibility and functionality needed to succeed. Overall, I.C.T.C. Holdings Corporation's HRO-ST3131 stands out as a forward-thinking solution that not only meets current demand but is also poised to support future advancements in organizational technology.