SPECIFICATION CHART
Your Power Sprayer Wand is intended for use with a 3½ Horsepower or larger
Minimum Air Pressure (for applying detergent/degreaser): | 40 | PSIG |
Minimum Air Pressure (for washing/rinsing surfaces): | 90 | PSIG |
Maximum Air Pressure: | 125 | PSIG |
Minimum Water Pressure: | 20 | PSIG |
Maximum Water Pressure: | 100 | PSIG |
Maximum Water Temperature: | 140 | ºF |
Maximum Chemical Draw Height: | 10 | Feet |
(maximum distance washer can be above the chemical container.)
Optimum Chemical Flow Rate in the Air/Chemical Mode, with the air pressure setting between 75 and 125 PSIG:
Approx. 10oz. per minute with a two foot draw height
Approx. 7oz. per minute with a five foot draw height
NOTE: Chemicals should have a viscosity (consistency or thickness) similar to
GENERAL INFORMATION
Congratulations on your purchase of a Sears Craftsman Power Sprayer Wand! It is durable and versatile and will serve you for years to come. Your Power Sprayer Wand combines air pressure with water, detergent or degreaser to clean and degrease. It can also be used for spraying lawn, garden, trees or bushes. It has a unique nozzle that allows you to change from a direct, forceful blast to a light, foliage mist with a push or a pull.
Your Power Sprayer Wand is designed to spray in the following modes:
•Air only
•Water only
•Water and Air only
•Air & chemical together
It is not designed to mix water and chemicals internally. Chemicals should be diluted with water before entering the gun to achieve precise control of chemicals.
GLOSSARY
SCFM: (Standard Cubic Feet Per Minute); a unit of measure of air delivery.
PSIG: Pounds per square inch gauge; a unit of measure of pressure.
TOOL NEEDED FOR ASSEMBLY
2 Wrenches: a 5/8" open end wrench for the
All other parts on the Power Sprayer Wand are tightened by hand.
5- ENG | D20059 |