Global Machinery Company MAG950HD Selecting the required function, Hints for use, Rotation only

Page 10

Selecting the required function

It is possible to use the rotary hammer drill in four different modes of operation:

1. Rotation only

Non hammer action, non pneumatic

For drilling into metal and wood products, can be used with the 13mm keyed chuck (Fig. P).

2.Rotary hammer action Pneumatic

For drilling into brick

and masonry products (Fig. Q). CAN NOT be used with the 13mm keyed chuck.

Use SDS drill bits only.

3. Chisel rotation mode

Allows the operator to rotate a flat chisel to the most suitable angle for the task (Fig. R).

CAN NOT be used with the 13mm keyed chuck.

4.Non rotating, pneumatic hammer action

For light demolition work or chiselling such as lifting tiles (Fig. S). CAN NOT used with the 13mm keyed chuck.

1.To select the required mode of operation, press the selector button (7) and set selector knob

(6) to the appropriate position.

2.Release the button (7).

P

Q

R

S

Hints for use

Note. When drilling into masonry, the drilling rate is fast and burnout of the tip will occur if the drill bit is not constantly cleared.

• Use only correctly sharpened

 

T

drill bits, which are suitable for

the material being drilled.

 

•To drill hard materials, firm pressure is required on the power tool. However, excessive pressure does not improve performance and places unnecessary pressure on the tool and its bit.

•When driving screws, always use a pilot hole and set the speed dial to low. Press firmly on the screw head and pull the trigger gradually increasing the speed. It is always wiser to test the screw driving on a scrap piece of the same material you are using.

•Larger diameter holes in hard wood, steel and concrete have to be drilled at slower speeds. However, the motor must not be struggling with the operation. If the motor is struggling DO NOT continue working, pull the drill clear of the work piece and run it on fast speed for a minute or so allowing the motor time to cool down before you attempt a little more of the work. If the job is too hard for the drill, do not continue, otherwise permanent damage to the motor will occur.

•Wire brushing or sanding should be carried out on the highest speed.

•Concrete drilling should be carried out on the highest speed. DO NOT overload motor when drilling concrete. DO NOT use too much pressure as the hammer action relies on the drill bit being able to move back and forward in the hole being drilled. Always clear the flutes of the drill bit by removing it from the hole regularly.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 950W SDS Rotary Hammer Drill Contents Introduction Description of symbolsSpecifications Environmental protectionGeneral safety rules Additional safety rules for drills Wear ear protectors with hammer drillsAssembly Contents of cartonUnpacking Know your product 1314Installing and removing bits Auxiliary handle and depth gaugeForward/reverse Operation Starting and stoppingVariable speed Lock on buttonHints for use Chisel rotation modeSelecting the required function Rotation onlyMaintenance Fitting the keyed chuckGMC customer assist

MAG950HD specifications

The Global Machinery Company MAG950HD is a robust and versatile machine designed for heavy-duty applications, making it a valuable asset for various sectors including construction, mining, and manufacturing. This model combines cutting-edge technology with unparalleled performance, delivering exceptional reliability and efficiency in demanding environments.

One of the standout features of the MAG950HD is its powerful engine, which provides high horsepower and torque, ensuring optimal performance even in the most challenging conditions. The durable design of the engine not only enhances the machine's longevity but also minimizes maintenance requirements. This machine is equipped with advanced cooling systems that prevent overheating, further increasing its efficiency and operational lifespan.

The MAG950HD incorporates state-of-the-art hydraulic technology, allowing for smooth and precise control during operations. The hydraulic system is designed to handle heavy loads with ease, enhancing productivity while reducing operator fatigue. Additionally, the machine features an intuitive control panel that improves usability, enabling operators to navigate and control functions effortlessly.

Another key characteristic of the MAG950HD is its exceptional mobility. With an advanced chassis design and powerful drivetrain, the machine can easily traverse various terrains, including rugged and uneven surfaces. This makes it ideal for work sites that require maneuverability in tight spaces.

Safety is a primary consideration in the design of the MAG950HD. The machine comes equipped with comprehensive safety features, including rollover protection, emergency stop functions, and an advanced monitoring system that alerts operators to potential issues. These features help ensure the safety of both the operator and those working in the vicinity.

Moreover, the MAG950HD is designed with environmental efficiency in mind. It complies with the latest emissions regulations, utilizing fuel-efficient technologies to reduce its carbon footprint. This commitment to sustainability is increasingly important in today’s industrial landscape.

Overall, the Global Machinery Company MAG950HD stands out in the heavy machinery market for its powerful performance, advanced technologies, and commitment to safety and sustainability. Whether for large-scale construction projects or smaller operational tasks, the MAG950HD is engineered to meet the diverse needs of modern industries. Its reliability and efficiency make it a top choice among professionals seeking high-performance machinery.
Top Page Image Contents