Global Machinery Company MAG950HD instruction manual Unpacking, Contents of carton, Assembly

Page 6

The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards. Children and frail people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:

•Damage to the lungs if an effective dust mask is not worn.

•Damage to hearing if effective ear defenders are not worn.

Wear goggles Wear earmuffs

Wear a breathing mask

Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Contents of carton

•Depth gauge rod

•Auxiliary handle

•SDS Drill bits 12mm x 160mm 16mm x 210mm 18mm x 210mm

•SDS Chisel bits Point chisel 250mm

Flat chisel 20mm x 250mm

•SDS Chuck adaptor

•13mm Keyed chuck

•Chuck key

Assembly

The Drill is packed, fully assembled.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 950W SDS Rotary Hammer Drill Contents Introduction Description of symbolsSpecifications Environmental protectionGeneral safety rules Additional safety rules for drills Wear ear protectors with hammer drillsContents of carton AssemblyUnpacking Know your product 1314Installing and removing bits Auxiliary handle and depth gaugeForward/reverse Operation Starting and stoppingVariable speed Lock on buttonHints for use Chisel rotation modeSelecting the required function Rotation onlyMaintenance Fitting the keyed chuckGMC customer assist

MAG950HD specifications

The Global Machinery Company MAG950HD is a robust and versatile machine designed for heavy-duty applications, making it a valuable asset for various sectors including construction, mining, and manufacturing. This model combines cutting-edge technology with unparalleled performance, delivering exceptional reliability and efficiency in demanding environments.

One of the standout features of the MAG950HD is its powerful engine, which provides high horsepower and torque, ensuring optimal performance even in the most challenging conditions. The durable design of the engine not only enhances the machine's longevity but also minimizes maintenance requirements. This machine is equipped with advanced cooling systems that prevent overheating, further increasing its efficiency and operational lifespan.

The MAG950HD incorporates state-of-the-art hydraulic technology, allowing for smooth and precise control during operations. The hydraulic system is designed to handle heavy loads with ease, enhancing productivity while reducing operator fatigue. Additionally, the machine features an intuitive control panel that improves usability, enabling operators to navigate and control functions effortlessly.

Another key characteristic of the MAG950HD is its exceptional mobility. With an advanced chassis design and powerful drivetrain, the machine can easily traverse various terrains, including rugged and uneven surfaces. This makes it ideal for work sites that require maneuverability in tight spaces.

Safety is a primary consideration in the design of the MAG950HD. The machine comes equipped with comprehensive safety features, including rollover protection, emergency stop functions, and an advanced monitoring system that alerts operators to potential issues. These features help ensure the safety of both the operator and those working in the vicinity.

Moreover, the MAG950HD is designed with environmental efficiency in mind. It complies with the latest emissions regulations, utilizing fuel-efficient technologies to reduce its carbon footprint. This commitment to sustainability is increasingly important in today’s industrial landscape.

Overall, the Global Machinery Company MAG950HD stands out in the heavy machinery market for its powerful performance, advanced technologies, and commitment to safety and sustainability. Whether for large-scale construction projects or smaller operational tasks, the MAG950HD is engineered to meet the diverse needs of modern industries. Its reliability and efficiency make it a top choice among professionals seeking high-performance machinery.
Top Page Image Contents