Global Machinery Company MAG950HD Operation Starting and stopping, Variable speed, Lock on button

Operation
Starting and stopping		H
1.	Plug the cordset into the
	mains socket.
2.	Depress the on/off trigger
	switch (1) to start the drill and

release the trigger when you wish to stop (Fig. H).

Variable speed

1.The speed of the drill can be adjusted using the variable speed dial (8).

2.To increase the speed, turn the dial clockwise (Fig. I).

3.To decrease the speed, turn the dial anti-clockwise (Fig. J).

I J

4.Selecting the speed enables the user to have greater control of the tool and allows drilling in a variety of materials.

Note. The speed can be changed while the drill is running.

Forward/reverse

1.The forward/reverse lever switch (4) is located immediately above the trigger switch (1).

2.It determines the direction of

rotation of the tool and serves	K
as a lock off control.

3.To select forward rotation, release the trigger switch and push the forward/reverse lever switch to the left side of the tool (Fig. K).

4.To select reverse, push the forward/reverse lever switch

(4) to the right side of the tool (Fig. L).

5.When the switch (4) is left in middle position, it locks the motor (Fig. M).

L M

WARNING. When changing the position of the switch (4) be sure the trigger is released and the motor is stationary. Any attempt to reverse the direction of rotation whilst the drill is turning is likely to permanently damage the switch.

Note. The first time the tool is run after changing the direction of rotation, you may hear a click on start up. This is normal and does not indicate a problem.

Lock on button

1.The lock on button (2) maintains the speed of the motor without having to hold the trigger switch (1) depressed.

2.If you require continuous operation, press the lock-on button (2) whilst the trigger switch is depressed (Fig. N).

3.To disengage the lock-on button, press the trigger switch (Fig. 0).

N O

9