Global Machinery Company GTX2450K, GTX1850K Additional safety instructions for the battery pack

Page 7

Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104°F (40°C) such as alongside sheds or metal structures in the summer.

The charger is designed for use from a standard household electrical supply (230–240 volts). Do not attempt to connect the charger to a supply with a different supply.

If you wish to charge a second battery pack, unplug the charger from the mains supply and leave it for at least 15 minutes. After this time you can charge a second battery pack.

Additional safety instructions for the battery pack

The battery pack for this tool has been shipped in a low charge condition.You should charge the battery pack fully before use.

To ensure the longest battery life and best battery performance, always charge the battery when the air temperature is between 18–24°C. Do not charge the battery pack when the temperature is below 0°C, or above 40°C. This is important. Failure to observe this safety rule could cause serious damage to the battery pack.

Do not incinerate the battery pack even if it is seriously damaged or can no longer hold a charge. The battery pack can explode in a fire.

Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks open or cracks, immediately discontinue its use and do not recharge it.

The battery pack utilizes nickel-cadmium cells. Cadmium is considered to be a toxic material. Use an environmentally safe disposal unit at a municipal waste disposal centre to dispose of a damaged or worn out battery.

7

Image 7
Contents Hammer Drill Contents Specifications Description of symbolsWork area Electrical safetyPersonal safety Power tool use and careWear ear protectors with impact drills Additional safety instructions for drillsService Is maintainedDesign Additional safety instructions for the chargerAdditional safety instructions for the battery pack Know your product Battery indicator Fitting and removing the battery packBattery charging To obtain the best life for the batteryLED Work area light Using the drillForward/reverse switch Torque adjustment/hammer selection collarInserting and removing bits Adjustable side handleDrilling Maintenance Chuck replacementPage Page Page Save this Manual for future reference