Head Adjustments
The headstock can be tilted from 45° clockwise to 90° counterclockwise.
1.Loosen the lock handle on the right side of the headstock.
2.Pull out the guide pin located on the left side of the headstock and rotate the pin 90°. See Figure 16. Tilt the headstock to the desired angle specified on the scale and tighten the lock handle on the right side of the head- stock.
Return to vertical position:
1.Loosen the lock handle located on the right side of the headstock.
2.Move the headstock to its original position and move the guide pin back into the guide slot. Tighten the lock handle.
The headstock can also be adjusted back and forth:
1.Loosen the lock handle located on the right side of the headstock.
2.Turn the black ribbed handle to move the headstock back and forth to desired position. Tighten the lock handle before operating the machine.
Figure 16. Guide pin location.
G7945/46 Radial Drill Press |