Grizzly G7945, G7946 instruction manual Safety Instructions For Power Tools

Page 4

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

 

 

 

 

 

 

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

 

 

 

 

 

 

WILL result in death or serious injury.

 

 

 

 

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COULD result in death or serious injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAY result in minor or moderate injury. It may also be used to alert

 

 

 

 

 

 

 

 

against unsafe practices.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTICE

 

This symbol is used to alert the user to useful information about

 

 

proper operation of the equipment.

 

 

 

 

 

 

 

 

 

Safety Instructions For Power Tools

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DO NOT USE IN DANGEROUS ENVI- RONMENT. Don’t use power tools in damp or wet locations, or where any flam- mable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

-2-

G7945/46 Radial Drill Press

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Radial Drill Press Model G7945/46Page Table Of Contents Safety Safety Instructions For Power ToolsAMP Rating Additional Safety Instructions For Drill Presses Circuit Requirements 110V OperationExtension Cords GroundingIntroduction CommentaryUnpacking Piece InventoryClean Up Site ConsiderationsBeginning Assembly AssemblyColumn/Base Table Support G7945 table and supportHeadstock HandlesAdjustments Speed ChangeDepth Stop Actual stop depth being measured G7945/46 Radial Drill PressTable Adjustments Locating pin and nut G7946Head Adjustments Guide pin location G7945/46 Radial Drill PressOperations Test Run Drill Bit ChangesMaintenance General TablesLubrication BeltClosure InformationMachine Data Sheet Grizzly Model G7946 Floor Radial Drill Press 28A 19A 84A G7946 only Base G7945/46 Radial Drill Press Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G7945, G7946 specifications

The Grizzly G7946 and G7945 are two exceptionally engineered tools designed for professional woodworkers and hobbyists who demand high quality and performance in their milling operations. These models are known for their robust construction, versatility, and precision capabilities, making them invaluable assets in any woodworking shop.

The G7946 model features a powerful 1.5 HP motor that provides ample power for handling a variety of milling tasks. The machine's table is constructed from high-quality cast iron, which not only offers stability but also helps to reduce vibration, resulting in smoother cuts. Measuring 36 inches by 5 inches, the table has ample workspace, allowing for the machining of larger workpieces with ease.

Equipped with an adjustable fence that locks firmly into place, the G7946 ensures that users can achieve accurate and repeatable cuts. The fence is also designed with a built-in scale for added convenience, enabling you to set up your cuts without the need for additional measuring tools. This feature streamlines the workflow and enhances productivity, making it ideal for both intricate detail work and bulk operations.

On the other hand, the G7945 model boasts a slightly different configuration but maintains a similar level of performance and precision. It includes a larger table for even more extensive projects, while its powerful 1.75 HP motor adds an extra level of capability for tougher materials. It features a quick-release mechanism which allows for easy adjustments, ensuring that you can swiftly transition between operations without interrupting your workflow.

Both machines come equipped with advanced technologies that enhance user experience. One notable feature is the integrated dust collection system, which keeps the workspace clean and contributes to a safer working environment. This system effectively captures wood shavings and particles, reducing airborne dust and allowing for maximum visibility while you work.

In summary, the Grizzly G7946 and G7945 are outstanding choices for anyone looking to upgrade their milling capabilities. With robust motors, spacious worktables, precision fencing systems, and efficient dust collection features, they stand out as leading options in the realm of woodworking machinery. Whether you are a seasoned professional or an enthusiastic hobbyist, these machines are designed to meet and exceed your expectations in terms of durability, performance, and versatility.
Top Page Image Contents