Grizzly G7945, G7946 instruction manual Introduction, Commentary

Page 8

SECTION 3: INTRODUCTION

Commentary

We are proud to offer the Grizzly Model G7945/46 Radial Drill Press. The Model G7945/46 is part of a growing Grizzly family of fine woodworking machinery. When used according to the guide- lines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satis- faction.

The Model G7945/46 is a five speed radial drill press that features variable swing up to 34" and pivoting head for drilling at just about any angle. A 1⁄2 H.P. motor powers the drill press from 550 to 3470 R.P.M. to handle a wide variety of drilling needs. The table tilts 90° in both directions and swings 360°. The Model G7946 is exactly the same as the Model G7945, but adds the double pivot table support as well as being a floor model.

A number of bits, sanding drums, and other accessories are available for the Model G7945/46 through the Grizzly catalog.

We are also pleased to provide this manual with the Model G7945/46. It was written to guide you through assembly, review safety considerations, and cover general operating procedures. It repre- sents our effort to produce the best documenta- tion possible. If you have any comments regard- ing this manual, please write to us at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Most importantly, we stand behind our machines. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

2406 Reach Road

Williamsport, PA 17701

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

After fall 2001:

Grizzly Industrial, Inc. 1203 Lycoming Circle Pennsdale, PA 17756

The specifications, drawings, and photographs illustrated in this manual represent the Model G7945/46 as supplied when the manual was pre- pared. However, owing to Grizzly’s policy of con- tinuous improvement, changes may be made at any time with no obligation on the part of Grizzly. Whenever possible, though, we send manual updates to all owners of a particular tool or machine. Should you receive one, we urge you to insert the new information with the old and keep it for reference.

Read the manual before assembly and opera- tion. Become familiar with the machine and it’s operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or fol- lowed.

 

 

 

 

 

 

 

 

 

 

 

 

-6-

G7945/46 Radial Drill Press

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Radial Drill Press Model G7945/46Page Table Of Contents Safety Safety Instructions For Power ToolsAMP Rating Additional Safety Instructions For Drill Presses Circuit Requirements 110V OperationExtension Cords GroundingIntroduction CommentaryUnpacking Piece InventoryClean Up Site ConsiderationsColumn/Base AssemblyBeginning Assembly Table Support G7945 table and supportHeadstock HandlesAdjustments Speed ChangeDepth Stop Actual stop depth being measured G7945/46 Radial Drill PressTable Adjustments Locating pin and nut G7946Head Adjustments Guide pin location G7945/46 Radial Drill PressOperations Test Run Drill Bit ChangesMaintenance General TablesLubrication BeltClosure InformationMachine Data Sheet Grizzly Model G7946 Floor Radial Drill Press 28A 19A 84A G7946 only Base G7945/46 Radial Drill Press Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G7945, G7946 specifications

The Grizzly G7946 and G7945 are two exceptionally engineered tools designed for professional woodworkers and hobbyists who demand high quality and performance in their milling operations. These models are known for their robust construction, versatility, and precision capabilities, making them invaluable assets in any woodworking shop.

The G7946 model features a powerful 1.5 HP motor that provides ample power for handling a variety of milling tasks. The machine's table is constructed from high-quality cast iron, which not only offers stability but also helps to reduce vibration, resulting in smoother cuts. Measuring 36 inches by 5 inches, the table has ample workspace, allowing for the machining of larger workpieces with ease.

Equipped with an adjustable fence that locks firmly into place, the G7946 ensures that users can achieve accurate and repeatable cuts. The fence is also designed with a built-in scale for added convenience, enabling you to set up your cuts without the need for additional measuring tools. This feature streamlines the workflow and enhances productivity, making it ideal for both intricate detail work and bulk operations.

On the other hand, the G7945 model boasts a slightly different configuration but maintains a similar level of performance and precision. It includes a larger table for even more extensive projects, while its powerful 1.75 HP motor adds an extra level of capability for tougher materials. It features a quick-release mechanism which allows for easy adjustments, ensuring that you can swiftly transition between operations without interrupting your workflow.

Both machines come equipped with advanced technologies that enhance user experience. One notable feature is the integrated dust collection system, which keeps the workspace clean and contributes to a safer working environment. This system effectively captures wood shavings and particles, reducing airborne dust and allowing for maximum visibility while you work.

In summary, the Grizzly G7946 and G7945 are outstanding choices for anyone looking to upgrade their milling capabilities. With robust motors, spacious worktables, precision fencing systems, and efficient dust collection features, they stand out as leading options in the realm of woodworking machinery. Whether you are a seasoned professional or an enthusiastic hobbyist, these machines are designed to meet and exceed your expectations in terms of durability, performance, and versatility.
Top Page Image Contents