Cassette tape – Play and record
| Top of the unit |
| /0%. |
| Cassette lid |
Basic play | Recording CDs |
1
2
Press [OPEN 0] on top of the unit.
Insert a cassette.
" |
|
" | Insert inside the |
| |
| guides |
Forward side
Insert the cassette to be recorded on.
Insert inside the guides
3 | Close the lid by hand. | |
4 | Press [TAPE 3] to start play. | |
| To play the other side of the cassette, turn the cassette | |
| over. |
|
|
|
|
To |
| Action |
stop tape playback | Press [CLEAR 7 ]. | |
|
| |
start one touch play | Press [TAPE 3] when the system is OFF | |
|
| with the cassette loaded. |
|
| |
Press [4/REW/4 ] or [3/FF/¢ ] in the | ||
rewind | stop mode. | |
|
|
|
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track, up to a maximum of 9.
Press [4/REW/ 4 ] or [3/FF/¢] during play.
Play resumes from the track found.
TPS may not function properly with:
•Short silent parts
•Noise occurs between tunes
•Silent parts found within tunes
Before recording
Preparation
Wind up the leader tape so that recording can begin immediately.
•Use normal position tape.
•High position and metal position tape can be used, but this unit will not be able to record or erase them correctly.
Recording the radio
1 | Insert the cassette to be recorded on. |
2 | Tune to the required station (refer page 13). |
3 | Press [¶REC/8] to start recording. |
To | Action | |
erase a recorded | 1) Insert the cassette to be recorded on. | |
sound | 2) | Press [TAPE 3] and then [CLEAR 7 ]. |
| 3) | Press [¶ REC/8 ]. |
|
| |
stop recording | Press [CLEAR 7 ]. | |
|
| |
stop recording | 1) Press [¶ REC/8 ]. | |
temporarily | 2) | Press again to resume recording. |
|
| |
to record on the | Turn the cassette over and press | |
other side of the | [¶ REC/8 ]. | |
tape |
|
|
|
|
|
Erasure prevention
The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.
Side A | To |
Normal tape | |
Tab for side B Tab for side A | Adhesive tape |
12
RQT8038