Panasonic SC-PM41 important safety instructions Sound adjustment, External unit

Sound adjustment

Selecting sound effects

You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

HEAVY → CLEAR → SOFT → VOCAL → OFF

Setting	Effect
HEAVY	Adds punch to rock
CLEAR	Clarifi es higher frequencies
SOFT	For background music
VOCAL	Adds gloss to vocal
OFF	No effect

Bass or treble

Enable you to enjoy the lower or higher pitch sound.

1		Press [BASS/TREBLE] repeatedly to select your
		desired setting.
	Setting		Effect
	BASS		For lower pitch sound
	TREBLE		For higher pitch sound
2		Press [∞] or [5] to adjust the level.

OR

To select bass or treble using the main unit:

1	Press [BASS] or [TREBLE] to select your desired
	setting.
2	Press [–] or [+] to adjust the level.

•The tone level can be varied within –3 to +3.

Enhancing the bass

Enable you to enjoy the powerful bass effect.

Press [H.BASS] repeatedly to select your desired setting.

LEVEL1 → LEVEL2 → OFF

Note

The actual effect depends on the disc.

16

Enjoying surround sound

Enable you to add natural width and depth to the stereo sound.

To activate

Press [SURROUND] to display “” indicator.

To cancel

Press [SURROUND] again to clear “” indicator.

•Surround sound is less discernible when listening through headphones.

•If interference in FM stereo reception increases, cancel the surround sound effect.

External unit

Connecting external unit

Preparation

•Make sure that the power supply for all components has been turned off before making any connections.

•For details, refer to the operating instructions of the unit which is to be connected.

•All peripheral components and cables sold separately.

Connecting analog equipment

This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch.

When units other than those described are to be connected, please consult your dealer.

(L)

(R)

		AUX
“LINE OUT”	R	L
position
Analog player (not included)	Rear panel of this unit

•An analog player with a built-in phono equalizer can be connected.

•Set the switch to the “LINE OUT” position at the back of the analog player.

Playing or recording from an external

unit

1	Press [AUX].
2	For listening: Proceed to step 3.
	For recording: Press [¶REC/8] to start recording.
3	Start playback from the external source. (For details,
	refer to the external unit’s instruction manual.)

RQT8038