Panasonic SC-PM41 Radio Tune, Manual tuning, Memory preset, FM allocation setting

Radio – Tune

Numeric

buttons

Manual tuning

1	Press [TUNER/BAND] to select “FM” or “AM”.
2	Press [PLAY MODE] to select “MANUAL”.
3	Press [4/REW/ 4 ] or [3/FF/¢] to select the
	frequency of the required station.

•“” is displayed when a stereo FM broadcast is being received.

To tune automatically

Press [4/REW/4] or [3/FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.

•Auto tuning may be interrupted when there is excessive interference.

•To cancel auto tuning, press [4/REW/4] or [3/FF/¢] once again.

To improve FM sound quality

Press and hold [PLAY MODE] to display “MONO”.

To cancel

Press and hold [PLAY MODE] again until “MONO” disappear.

•MONO is also cancelled if the frequency is changed.

•Turn off “MONO” for normal listening.

Memory preset

Up to 15 stations each can be set in the FM and AM bands.

Preparation

Press [TUNER/BAND] to select “FM” or “AM”.

Automatic presetting

Press and hold [PROGRAM] to start presetting.

Manual presetting

1	Press [PLAY MODE] to select “MANUAL”.
2	Press [4/REW/ 4 ] or [3/FF/¢] to tune to the
	required station.
3	Press [PROGRAM].
4	Press numeric buttons to select a channel.
	• The station occupying a channel is erased if another

station is preset in that channel.

Selecting a preset station

Press numeric buttons to select the channel.

• For channels 10 to 15 press [h10], then the two digits.

OR

1	Press [PLAY MODE] to select “PRESET”.
2	Press [4/REW/ 4 ] or [3/FF/¢] to select the
	channel.

FM allocation setting

By main unit only

•This system can also receive FM broadcasts allocated in 0.1 MHz steps.

To change the step to 0.1 MHz

1 Press and hold [TUNER/BAND].

•After a few seconds the display changes to a fl ashing display of the current minimum frequency.

2 Continue to hold down [TUNER/BAND].

•When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.

•After changing the setting, previously preset frequency will be cleared.

13

RQT8038